1996 Toyota Camry Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Toyota Camry, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1996 Camry — Year-Specific Fitment Context
The 1996 Toyota Camry is in year 4 of 33 using the 5x114.3 pattern (1993–2025). Wheels from any 1993–2025 Toyota Camry are cross-compatible with the 1996 model. Across its full production run (1992–2025), the Camry has also used: 5x100.
Toyota Camry Bolt Pattern by Year
The table below shows how the Camry's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x100 | 54.1 | 40 |
| 1993 | 5x114.3 | 60.1 | 46 |
| 1994 | 5x114.3 | 60.1 | 46 |
| 1995 | 5x114.3 | 60.1 | 46 |
| ▸ 1996 | 5x114.3 | 60.1 | 46 |
| 1997 | 5x114.3 | 60.1 | 46 |
| 1998 | 5x114.3 | 60.1 | 46 |
| 1999 | 5x114.3 | 60.1 | 46 |
| 2000 | 5x114.3 | 60.1 | 46 |
| 2001 | 5x114.3 | 60.1 | 46 |
| 2002 | 5x114.3 | 60.1 | 46 |
| 2003 | 5x114.3 | 60.1 | 46 |
| 2004 | 5x114.3 | 60.1 | 46 |
| 2005 | 5x114.3 | 60.1 | 46 |
| 2006 | 5x114.3 | 60.1 | 46 |
| 2007 | 5x114.3 | 60.1 | 46 |
| 2008 | 5x114.3 | 60.1 | 46 |
| 2009 | 5x114.3 | 60.1 | 46 |
| 2010 | 5x114.3 | 60.1 | 46 |
| 2011 | 5x114.3 | 60.1 | 46 |
| 2012 | 5x114.3 | 60.1 | 46 |
| 2013 | 5x114.3 | 60.1 | 46 |
| 2014 | 5x114.3 | 60.1 | 46 |
| 2015 | 5x114.3 | 60.1 | 46 |
| 2016 | 5x114.3 | 60.1 | 46 |
| 2017 | 5x114.3 | 60.1 | 46 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
| 2025 | 5x114.3 | 60.1 | 35-45 |
Fitment Notes
The 1996 Toyota Camry has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Camry appears from 1992 to 2025 (34 model years).
Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
1996 Toyota Camry — Frequently Asked Questions
What is the bolt pattern for a 1996 Toyota Camry?
The 1996 Toyota Camry uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 46mm.
What other years of Toyota Camry have the same bolt pattern as the 1996?
The Toyota Camry uses the 5x114.3 pattern from 1993 through 2025. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What does 46mm offset mean for the 1996 Camry?
An offset of 46mm means the wheel's mounting surface is 46mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
How tight should I torque the lug nuts on a 1996 Toyota Camry?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1996 Toyota Camry?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 46mm, and a center bore of at least 60.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 1996 Toyota?
The 1996 Camry uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Toyota Camry has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2025 (34 model years).
- Observed bolt-pattern variants: 2 (5x100, 5x114.3).
- Observed total offset span across years: 91.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1996 Toyota Camry, please report it via our About page contact so we can verify and update this record.