2017 Toyota Mirai Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2017 Toyota Mirai, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 39 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2017 Mirai — Year-Specific Fitment Context
The 2017 Toyota Mirai is in year 2 of 9 using the 5x114.3 pattern (2016–2024). Wheels from any 2016–2024 Toyota Mirai are cross-compatible with the 2017 model.
Toyota Mirai Bolt Pattern by Year
The table below shows how the Mirai's wheel specifications have changed over the years. The 2017 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2017 Toyota Mirai
For the 2017 Toyota Mirai, the 5x114.3 bolt pattern is shared with 2016–2024 models. The 60.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration. Offset is sensitive: stock is 39mm; deviations affect handling and clearance. Always use lug nuts with 12x1.50 thread pitch and correct seat type (conical/ball) to avoid loosening. Verify wheel load rating meets Mirai's weight. Professional installation recommended.
Historical Fitment Data Reference
In our dataset, Toyota Mirai appears from 2016 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing or clearance issues.
- ✅ Use hub-centric rings made of aluminum or plastic; steel rings may corrode.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2017 Toyota Mirai — Frequently Asked Questions
What is the bolt pattern for a 2017 Toyota Mirai?
The 2017 Toyota Mirai uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 39mm.
What other years of Toyota Mirai have the same bolt pattern as the 2017?
The Toyota Mirai uses the 5x114.3 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2017, provided the offset and center bore also match.
What is the factory wheel offset for a 2017 Toyota Mirai?
The OEM offset for the 2017 Mirai is typically around 39mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2017 Toyota Mirai?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2017 Mirai, the PCD is 5x114.3.
Can I put aftermarket wheels on my 2017 Toyota Mirai?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 39mm, and a center bore of at least 60.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2017 Toyota Mirai?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset