2025 Toyota Mirai Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Mirai is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat seat, 21mm hex) fasteners tightened to 76 ft-lbs (103 Nm).
2025 Toyota Mirai Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 76 ft-lbs (103 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Mirai — Year-Specific Fitment Context
The 2025 Toyota Mirai is in year 10 of 11 using the 5x114.3 pattern (2016–2026). Wheels from any 2016–2026 Toyota Mirai are cross-compatible with the 2025 model.
Toyota Mirai Bolt Pattern by Year
Looking for all generations? View the complete Toyota Mirai (2016–2026) Bolt Pattern & Generation Guide →
The table below shows how the Mirai's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Toyota Mirai Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota Mirai, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Hyundai Santa Cruz | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2008 Hyundai Santa Fe | 66.1 mm | 66.1mm → 60.1mm |
41 |
| 2024 Hyundai Santa Fe Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2023 Hyundai Santa Fe Plug-in Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2018 Hyundai Santa Fe Sport | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2019 Hyundai Santa Fe XL | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 76 ft-lbs (103 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota Mirai — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota Mirai?
The 2025 Toyota Mirai uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Mirai have the same bolt pattern as the 2025?
The Toyota Mirai uses the 5x114.3 pattern from 2016 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Do 2025 Toyota Mirais use lug bolts or lug nuts?
The 2025 Mirai requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2025 Toyota Mirai?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2025 Toyota Mirai?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What is the PCD for a 2025 Toyota Mirai?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2025 Mirai, the PCD is 5x114.3.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →