2018 Toyota Mirai Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Toyota Mirai, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 39 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2018 Mirai — Year-Specific Fitment Context
The 2018 Toyota Mirai is in year 3 of 9 using the 5x114.3 pattern (2016–2024). Wheels from any 2016–2024 Toyota Mirai are cross-compatible with the 2018 model.
Toyota Mirai Bolt Pattern by Year
The table below shows how the Mirai's wheel specifications have changed over the years. The 2018 model year is highlighted.
Fitment Notes
The 2018 Toyota Mirai has a bolt pattern of 5x114.3.
Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".
This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Toyota Mirai appears from 2016 to 2024 (8 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
2018 Toyota Mirai — Frequently Asked Questions
What is the bolt pattern for a 2018 Toyota Mirai?
The 2018 Toyota Mirai uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 39mm.
What other years of Toyota Mirai have the same bolt pattern as the 2018?
The Toyota Mirai uses the 5x114.3 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What is the factory wheel offset for a 2018 Toyota Mirai?
The OEM offset for the 2018 Mirai is typically around 39mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2018 Toyota Mirai?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 39mm, and a center bore of at least 60.1mm (using hub rings if larger).
Do 2018 Toyota Mirais use lug bolts or lug nuts?
The 2018 Mirai requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2018 Toyota Mirai?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Toyota Mirai is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2016-2024 (8 model years).
- Observed bolt-pattern variants: 1 (5x114.3).
- Observed total offset span across years: 84.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2018 Toyota Mirai, please report it via our About page contact so we can verify and update this record.