2022 Toyota Mirai Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Toyota Mirai, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Mirai — Year-Specific Fitment Context
The 2022 Toyota Mirai is in year 7 of 9 using the 5x114.3 pattern (2016–2024). Wheels from any 2016–2024 Toyota Mirai are cross-compatible with the 2022 model.
Toyota Mirai Bolt Pattern by Year
The table below shows how the Mirai's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Toyota Mirai
For the 2022 Toyota Mirai, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use M12x1.5 lug nuts with the correct seat (conical 60-degree for most aftermarket wheels; verify factory seat type). Improper thread pitch or seat can cause wheel loss. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Mirai appears from 2016 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 84.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 lb-ft after 50-100 miles of driving to account for settling.
- ✅ Avoid using wheels with a center bore larger than 60.1mm without hub-centric rings; vibration and stress on studs may occur.
- ✅ Check offset carefully: 35-45mm is the safe range. Lower offset (e.g., 30mm) may cause fender rubbing; higher offset (e.g., 50mm) may contact suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Toyota Mirai — Frequently Asked Questions
What is the bolt pattern for a 2022 Toyota Mirai?
The 2022 Toyota Mirai uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mmmm.
What other years of Toyota Mirai have the same bolt pattern as the 2022?
The Toyota Mirai uses the 5x114.3 pattern from 2016 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
What is the center bore of a 2022 Toyota Mirai?
The factory center bore (hub bore) for the 2022 Toyota Mirai is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2022 Toyota Mirais use lug bolts or lug nuts?
The 2022 Mirai requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 60.1mm center bore important for the 2022 Mirai?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 2022 Toyota Mirai?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset