2019 Toyota Prius Prime Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota Prius Prime, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x100 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 54.1 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 Prius Prime — Year-Specific Fitment Context
The 2019 Toyota Prius Prime is in year 3 of 6 using the 5x100 pattern (2017–2022). Wheels from any 2017–2022 Toyota Prius Prime are cross-compatible with the 2019 model. Across its full production run (2017–2024), the Prius Prime has also used: 5x114.3.
Toyota Prius Prime Bolt Pattern by Year
The table below shows how the Prius Prime's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x100 Pattern Context
This bolt pattern appears on 447 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x100:
Expert Buying Guide for 2019 Toyota Prius Prime
The 2019 Toyota Prius Prime uses a 5x100 bolt pattern with a 54.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches exactly or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: the Prius Prime requires 12x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel detachment. For 2017–2022 models, wheels are cross-compatible, but note that later models (2023+) switched to 5x114.3, so verify fitment carefully.
Historical Fitment Data Reference
In our dataset, Toyota Prius Prime appears from 2017 to 2024 (7 model years). Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 6.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 54.1mm without hub-centric rings; plastic rings are acceptable for street use.
- ✅ Check brake caliper clearance when using wheels with offset below 41mm, as the Prius Prime has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota Prius Prime — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota Prius Prime?
The 2019 Toyota Prius Prime uses a 5x100 bolt pattern (also called lug pattern or PCD). The center bore is 54.1mm and the offset is 46mm.
What other years of Toyota Prius Prime have the same bolt pattern as the 2019?
The Toyota Prius Prime uses the 5x100 pattern from 2017 through 2022. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What is the center bore of a 2019 Toyota Prius Prime?
The factory center bore (hub bore) for the 2019 Toyota Prius Prime is 54.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Toyota fit my 2019 Prius Prime?
Only if they share the exact same 5x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 54.1mm.
How tight should I torque the lug nuts on a 2019 Toyota Prius Prime?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2019 Toyota Prius Prime?
Absolutely. Just ensure the aftermarket wheels have a 5x100 bolt pattern, an offset near 46mm, and a center bore of at least 54.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset