2024 Toyota Prius Prime Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Prius Prime, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x114.3 (5x4.5")
Lug Nut / Bolt Size 12x1.5
Center Bore (CB) 60.1 mm
Offset (ET) 40
Torque Specs 80 ft-lbs (108 Nm)

2024 Prius Prime — Year-Specific Fitment Context

The 2024 is the only model year of the Toyota Prius Prime in our database using the 5x114.3 bolt pattern. Across its full production run (2017–2024), the Prius Prime has also used: 5x100.

Toyota Prius Prime Bolt Pattern by Year

The table below shows how the Prius Prime's wheel specifications have changed over the years. The 2024 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2017 5x100 54.1 46
2018 5x100 54.1 46
2019 5x100 54.1 46
2020 5x100 54.1 45
2021 5x100 54.1 45
2022 5x100 54.1 45
▸ 2024 5x114.3 60.1 40

Fitment Notes

The 2024 Toyota Prius Prime has a bolt pattern of 5x114.3.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.5".

This means it is a 5 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Toyota Prius Prime appears from 2017 to 2024 (7 model years).

Across model years, this model appears with 2 bolt patterns (5x100, 5x114.3).

5x114.3 Pattern Context

This bolt pattern appears on 2902 vehicles in our current database and is considered very common.

Examples of other vehicles using 5x114.3:

2024 Toyota Prius Prime — Frequently Asked Questions

What is the bolt pattern for a 2024 Toyota Prius Prime?

The 2024 Toyota Prius Prime uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 40mm.

How tight should I torque the lug nuts on a 2024 Toyota Prius Prime?

Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What is the center bore of a 2024 Toyota Prius Prime?

The factory center bore (hub bore) for the 2024 Toyota Prius Prime is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.

Can I put aftermarket wheels on my 2024 Toyota Prius Prime?

Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 60.1mm (using hub rings if larger).

What is the PCD for a 2024 Toyota Prius Prime?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2024 Prius Prime, the PCD is 5x114.3.

Can I use spacers on my 2024 Toyota Prius Prime?

Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Toyota Prius Prime has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2024 Toyota Prius Prime, please report it via our About page contact so we can verify and update this record.

Toyota Prius Prime By Year

2017 2018 2019 2020 2021 2022 2024

Other Toyota Models

86 Corolla Hatchback Corolla iM Cressida Crown Signia FJ Cruiser GR Corolla Grand Highlander Hybrid Highlander Matrix Previa Prius Prius Plug-in Hybrid Prius Prime Prius v RAV4 Tacoma Double Cab Tundra CrewMax Venza Yaris Hatchback