2019 Toyota RAV4 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota RAV4, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 RAV4 — Year-Specific Fitment Context
The 2019 Toyota RAV4 is in year 24 of 29 using the 5x114.3 pattern (1996–2024). Wheels from any 1996–2024 Toyota RAV4 are cross-compatible with the 2019 model.
Toyota RAV4 Bolt Pattern by Year
The table below shows how the RAV4's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1996 | 5x114.3 | 60.1 | 46 |
| 1997 | 5x114.3 | 60.1 | 46 |
| 1998 | 5x114.3 | 60.1 | 46 |
| 1999 | 5x114.3 | 60.1 | 46 |
| 2000 | 5x114.3 | 60.1 | 46 |
| 2001 | 5x114.3 | 60.1 | 46 |
| 2002 | 5x114.3 | 60.1 | 46 |
| 2003 | 5x114.3 | 60.1 | 46 |
| 2004 | 5x114.3 | 60.1 | 46 |
| 2005 | 5x114.3 | 60.1 | 46 |
| 2006 | 5x114.3 | 60.1 | 46 |
| 2007 | 5x114.3 | 60.1 | 46 |
| 2008 | 5x114.3 | 60.1 | 46 |
| 2009 | 5x114.3 | 60.1 | 46 |
| 2010 | 5x114.3 | 60.1 | 46 |
| 2011 | 5x114.3 | 60.1 | 46 |
| 2012 | 5x114.3 | 60.1 | 46 |
| 2013 | 5x114.3 | 60.1 | 46 |
| 2014 | 5x114.3 | 60.1 | 46 |
| 2015 | 5x114.3 | 60.1 | 46 |
| 2016 | 5x114.3 | 60.1 | 46 |
| 2017 | 5x114.3 | 60.1 | 46 |
| 2018 | 5x114.3 | 60.1 | 35-45 |
| ▸ 2019 | 5x114.3 | 60.1 | 35-45 |
| 2020 | 5x114.3 | 60.1 | 35-45 |
| 2021 | 5x114.3 | 60.1 | 35-45 |
| 2022 | 5x114.3 | 60.1 | 35-45 |
| 2023 | 5x114.3 | 60.1 | 35-45 |
| 2024 | 5x114.3 | 60.1 | 35-45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Toyota RAV4
For your 2019 Toyota RAV4, the bolt pattern is 5x114.3mm with a critical center bore of 60.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset must stay within 35-45mm; deviating can cause rubbing or clearance issues with suspension and brakes. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats, while aftermarket may require ball or conical seats. Mismatched lug nuts risk wheel loosening. Verify lug nut engagement (minimum 6-8 full turns) and torque to manufacturer specs (76 ft-lbs). Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Toyota RAV4 appears from 1996 to 2024 (29 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 91.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving to account for settling.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 60.1mm bore is specific and mismatched bores cause vibration.
- ✅ Check wheel offset carefully: +35mm may sit flush, +45mm tucks inward; test fitment before purchase to avoid brake caliper or strut clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota RAV4 — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota RAV4?
The 2019 Toyota RAV4 uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota RAV4 have the same bolt pattern as the 2019?
The Toyota RAV4 uses the 5x114.3 pattern from 1996 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Toyota?
The 2019 RAV4 uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 60.1mm center bore important for the 2019 RAV4?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2019 Toyota RAV4?
The OEM offset for the 2019 RAV4 is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2019 Toyota RAV4s use lug bolts or lug nuts?
The 2019 RAV4 requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset