1995 Toyota T100 Xtracab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Toyota T100 Xtracab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | M12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 10-25mm |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
1995 T100 Xtracab — Year-Specific Fitment Context
The 1995 model year marks the beginning of the Toyota T100 Xtracab's 6x139.7 bolt pattern era, which continued through 1998 (4 consecutive years). Wheels from any 1995–1998 Toyota T100 Xtracab are cross-compatible with the 1995 model.
Toyota T100 Xtracab Bolt Pattern by Year
The table below shows how the T100 Xtracab's wheel specifications have changed over the years. The 1995 model year is highlighted.
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 1995 Toyota T100 Xtracab
For your 1995 Toyota T100 Xtracab, the 6x139.7 bolt pattern is shared with 1995-1998 models, but the 106.1mm center bore is critical. Aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 10-25mm; deviations risk rubbing or bearing stress. Always use M12x1.5 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat, while aftermarket may require ball or shank-style nuts. Never mix seat types; improper seating can cause wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota T100 Xtracab appears from 1995 to 1998 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of driving, then check periodically.
- ✅ When using aftermarket wheels, ensure hub-centric rings are installed to match the 106.1mm center bore.
- ✅ Avoid wheels with offset below 10mm (too aggressive) or above 25mm (too tucked) to prevent suspension or brake clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Toyota T100 Xtracab — Frequently Asked Questions
What is the bolt pattern for a 1995 Toyota T100 Xtracab?
The 1995 Toyota T100 Xtracab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 10-25mmmm.
What other years of Toyota T100 Xtracab have the same bolt pattern as the 1995?
The Toyota T100 Xtracab uses the 6x139.7 pattern from 1995 through 1998. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
What is the factory wheel offset for a 1995 Toyota T100 Xtracab?
The OEM offset for the 1995 T100 Xtracab is typically around 10-25mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 1995 Toyota T100 Xtracabs use lug bolts or lug nuts?
The 1995 T100 Xtracab requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 1995 Toyota T100 Xtracab?
Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 1995 Toyota T100 Xtracab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset