1996 Toyota T100 Xtracab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Toyota T100 Xtracab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 106.1 mm
Offset (ET) 10-25mm
Torque Specs 80 ft-lbs (108 Nm)

1996 T100 Xtracab — Year-Specific Fitment Context

The 1996 Toyota T100 Xtracab is in year 2 of 4 using the 6x139.7 pattern (1995–1998). Wheels from any 1995–1998 Toyota T100 Xtracab are cross-compatible with the 1996 model.

Toyota T100 Xtracab Bolt Pattern by Year

The table below shows how the T100 Xtracab's wheel specifications have changed over the years. The 1996 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1995 6x139.7 106.1 10-25mm
▸ 1996 6x139.7 106.1 10-25mm
1997 6x139.7 106.1 10-25mm
1998 6x139.7 106.1 10-25mm

Fitment Notes

The 1996 Toyota T100 Xtracab has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Toyota T100 Xtracab appears from 1995 to 1998 (4 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

1996 Toyota T100 Xtracab — Frequently Asked Questions

What is the bolt pattern for a 1996 Toyota T100 Xtracab?

The 1996 Toyota T100 Xtracab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 10-25mmmm.

What other years of Toyota T100 Xtracab have the same bolt pattern as the 1996?

The Toyota T100 Xtracab uses the 6x139.7 pattern from 1995 through 1998. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.

How tight should I torque the lug nuts on a 1996 Toyota T100 Xtracab?

Refer to your owner's manual for exact specs, but always tighten the M12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

How do I measure the bolt pattern on my 1996 Toyota?

The 1996 T100 Xtracab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.

Can I use spacers on my 1996 Toyota T100 Xtracab?

Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.

What is the factory wheel offset for a 1996 Toyota T100 Xtracab?

The OEM offset for the 1996 T100 Xtracab is typically around 10-25mmmm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Toyota T100 Xtracab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1996 Toyota T100 Xtracab, please report it via our About page contact so we can verify and update this record.

Toyota T100 Xtracab By Year

1995 1996 1997 1998

Other Toyota Models

4Runner Camry Hybrid Crown Crown Signia Echo FJ Cruiser Grand Highlander Grand Highlander Hybrid Highlander Hybrid Matrix Supra T100 Xtracab Tacoma Double Cab Tercel Tundra Access Cab Tundra Hybrid CrewMax Venza Xtra Cab Yaris Hatchback Yaris iA