1998 Toyota T100 Xtracab Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Toyota T100 Xtracab, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 6x139.7 (6x5.5")
Lug Nut / Bolt Size M12x1.5
Center Bore (CB) 106.1 mm
Offset (ET) 10-25mm
Torque Specs 80 ft-lbs (108 Nm)

1998 T100 Xtracab — Year-Specific Fitment Context

The 1998 model year is the final year of the Toyota T100 Xtracab's 6x139.7 bolt pattern run (since 1995). Wheels from any 1995–1998 Toyota T100 Xtracab are cross-compatible with the 1998 model.

Toyota T100 Xtracab Bolt Pattern by Year

The table below shows how the T100 Xtracab's wheel specifications have changed over the years. The 1998 model year is highlighted.

Year Bolt Pattern Center Bore Offset
1995 6x139.7 106.1 10-25mm
1996 6x139.7 106.1 10-25mm
1997 6x139.7 106.1 10-25mm
▸ 1998 6x139.7 106.1 10-25mm

Fitment Notes

The 1998 Toyota T100 Xtracab has a bolt pattern of 6x139.7.

Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".

This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Toyota T100 Xtracab appears from 1995 to 1998 (4 model years).

Across recorded model years, this model generally keeps the same bolt pattern.

6x139.7 Pattern Context

This bolt pattern appears on 1067 vehicles in our current database and is considered common.

Examples of other vehicles using 6x139.7:

1998 Toyota T100 Xtracab — Frequently Asked Questions

What is the bolt pattern for a 1998 Toyota T100 Xtracab?

The 1998 Toyota T100 Xtracab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 10-25mmmm.

What other years of Toyota T100 Xtracab have the same bolt pattern as the 1998?

The Toyota T100 Xtracab uses the 6x139.7 pattern from 1995 through 1998. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.

Will wheels from another Toyota fit my 1998 T100 Xtracab?

Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 106.1mm.

What is the PCD for a 1998 Toyota T100 Xtracab?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1998 T100 Xtracab, the PCD is 6x139.7.

Can I use spacers on my 1998 Toyota T100 Xtracab?

Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 106.1mm center bore. Also verify that you have enough thread engagement for your M12x1.5 hardware.

Do 1998 Toyota T100 Xtracabs use lug bolts or lug nuts?

The 1998 T100 Xtracab requires M12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Toyota T100 Xtracab is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 1998 Toyota T100 Xtracab, please report it via our About page contact so we can verify and update this record.

Toyota T100 Xtracab By Year

1995 1996 1997 1998

Other Toyota Models

Avalon Avalon Hybrid Camry Hybrid Celica GR Corolla Matrix Prius RAV4 Hybrid RAV4 Prime Regular Cab Sequoia Tacoma Regular Cab Tacoma XtraCab Tacoma Xtracab Tercel Tundra Access Cab Tundra Double Cab Tundra Hybrid CrewMax Tundra Regular Cab bZ4X