2008 Volkswagen R32 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Volkswagen R32, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x112 |
|---|---|
| Lug Nut / Bolt Size | M14x1.5 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 45-50mm |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 R32 — Year-Specific Fitment Context
The 2008 is the only model year of the Volkswagen R32 in our database using the 5x112 bolt pattern. Across its full production run (2004–2008), the R32 has also used: 5x100.
Volkswagen R32 Bolt Pattern by Year
The table below shows how the R32's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 5x100 | 57.1 | 30-40mm |
| ▸ 2008 | 5x112 | 57.1 | 45-50mm |
Fitment Notes
The 2008 Volkswagen R32 has a bolt pattern of 5x112.
This means it is a 5 lug pattern with a circle diameter of 112mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volkswagen R32 appears from 2004 to 2008 (2 model years).
Across model years, this model appears with 2 bolt patterns (5x100, 5x112).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
5x112 Pattern Context
This bolt pattern appears on 1490 vehicles in our current database and is considered common.
Examples of other vehicles using 5x112:
2008 Volkswagen R32 — Frequently Asked Questions
What is the bolt pattern for a 2008 Volkswagen R32?
The 2008 Volkswagen R32 uses a 5x112 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 45-50mmmm.
Do 2008 Volkswagen R32s use lug bolts or lug nuts?
The 2008 R32 requires M14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2008 Volkswagen R32?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 R32, the PCD is 5x112.
Will wheels from another Volkswagen fit my 2008 R32?
Only if they share the exact same 5x112 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Can I use spacers on my 2008 Volkswagen R32?
Yes, but ensure the wheel spacers match the 5x112 bolt pattern and 57.1mm center bore. Also verify that you have enough thread engagement for your M14x1.5 hardware.
How tight should I torque the lug nuts on a 2008 Volkswagen R32?
Refer to your owner's manual for exact specs, but always tighten the M14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Fitment Checklist Before You Buy Wheels
- Confirm bolt pattern carefully. 5x112 is often confused with other common 5-lug patterns.
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Volkswagen R32 has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 2004-2008 (2 model years).
- Observed bolt-pattern variants: 2 (5x100, 5x112).
- Observed total offset span across years: 95.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2008 Volkswagen R32, please report it via our About page contact so we can verify and update this record.