2012 Volkswagen Routan Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Volkswagen Routan, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 Routan — Year-Specific Fitment Context
The 2012 Volkswagen Routan is in year 4 of 6 using the 5x127 pattern (2009–2014). Wheels from any 2009–2014 Volkswagen Routan are cross-compatible with the 2012 model.
Volkswagen Routan Bolt Pattern by Year
The table below shows how the Routan's wheel specifications have changed over the years. The 2012 model year is highlighted.
Fitment Notes
The 2012 Volkswagen Routan has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volkswagen Routan appears from 2009 to 2014 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2012 Volkswagen Routan — Frequently Asked Questions
What is the bolt pattern for a 2012 Volkswagen Routan?
The 2012 Volkswagen Routan uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Volkswagen Routan have the same bolt pattern as the 2012?
The Volkswagen Routan uses the 5x127 pattern from 2009 through 2014. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the PCD for a 2012 Volkswagen Routan?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Routan, the PCD is 5x127.
What lug nut size does the 2012 Volkswagen Routan use?
The 2012 Volkswagen Routan uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2012 Volkswagen Routan?
Yes, but ensure the wheel spacers match the 5x127 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Can I put aftermarket wheels on my 2012 Volkswagen Routan?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 40mm, and a center bore of at least 71.5mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volkswagen Routan is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2009-2014 (6 model years).
- Observed bolt-pattern variants: 1 (5x127).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2012 Volkswagen Routan, please report it via our About page contact so we can verify and update this record.