1992 Volvo 940 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Volvo 940, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1992 940 — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Volvo 940's 5x108 bolt pattern era, which continued through 1995 (4 consecutive years). Wheels from any 1992–1995 Volvo 940 are cross-compatible with the 1992 model.
Volvo 940 Bolt Pattern by Year
The table below shows how the 940's wheel specifications have changed over the years. The 1992 model year is highlighted.
Fitment Notes
The 1992 Volvo 940 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo 940 appears from 1992 to 1995 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
1992 Volvo 940 — Frequently Asked Questions
What is the bolt pattern for a 1992 Volvo 940?
The 1992 Volvo 940 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Volvo 940 have the same bolt pattern as the 1992?
The Volvo 940 uses the 5x108 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 1992 Volvo 940?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 1992 Volvo 940?
The factory center bore (hub bore) for the 1992 Volvo 940 is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 1992 Volvo?
The 1992 940 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Why is matching the 63.4mm center bore important for the 1992 940?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo 940 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-1995 (4 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 1992 Volvo 940, please report it via our About page contact so we can verify and update this record.