2025 Land Rover Range Rover Velar Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Land Rover Range Rover Velar is 5x108. It has a center bore of 63.4 mm, an offset range of 40-45, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2025 Land Rover Range Rover Velar Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 40-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2025 Range Rover Velar — Year-Specific Fitment Context
The 2025 Land Rover Range Rover Velar is in year 8 of 9 using the 5x108 pattern (2018–2026). Wheels from any 2018–2026 Land Rover Range Rover Velar are cross-compatible with the 2025 model.
Land Rover Range Rover Velar Bolt Pattern by Year
Looking for all generations? View the complete Land Rover Range Rover Velar (2018–2026) Bolt Pattern & Generation Guide →
The table below shows how the Range Rover Velar's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Land Rover Range Rover Velar Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2025 Land Rover Range Rover Velar, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2017 Volvo V90 | 63.4 mm (Exact) | 47,5 | B 14x1.50 (Cone) |
| 2025 Volvo V90CC | 63.4 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2024 Volvo WAH | 63.4 mm (Exact) | 45-55 | 14x1.5 (Ball) |
| 2025 Volvo WHL | 63.4 mm (Exact) | 35-50 | 14x1.5 (Ball) |
| 2024 Volvo WHLB | 63.4 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Volvo XC40 | 63.4 mm (Exact) | 45-50 | 14x1.5 (Ball) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1992 Lincoln Continental | 70.5 mm | 70.5mm → 63.4mm |
40 |
| 2005 Maserati GranSport | 67.1 mm | 67.1mm → 63.4mm |
53 |
| 1992 Volvo 240 | 65.1 mm | 65.1mm → 63.4mm |
25 |
| 1998 Volvo C70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Land Rover Range Rover Velar — Frequently Asked Questions
What is the bolt pattern for a 2025 Land Rover Range Rover Velar?
The 2025 Land Rover Range Rover Velar uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 40-45mm.
What other years of Land Rover Range Rover Velar have the same bolt pattern as the 2025?
The Land Rover Range Rover Velar uses the 5x108 pattern from 2018 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
What lug nut size does the 2025 Land Rover Range Rover Velar use?
The 2025 Land Rover Range Rover Velar uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 2025 Land Rover Range Rover Velar?
The OEM offset for the 2025 Range Rover Velar is typically around 40-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2025 Land Rover Range Rover Velar?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
How do I measure the bolt pattern on my 2025 Land Rover?
The 2025 Range Rover Velar uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →