2020 Land Rover Range Rover Velar Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Land Rover Range Rover Velar, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 Range Rover Velar — Year-Specific Fitment Context
The 2020 Land Rover Range Rover Velar is in year 3 of 7 using the 5x108 pattern (2018–2024). Wheels from any 2018–2024 Land Rover Range Rover Velar are cross-compatible with the 2020 model.
Land Rover Range Rover Velar Bolt Pattern by Year
The table below shows how the Range Rover Velar's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2020 Land Rover Range Rover Velar
For your 2020 Land Rover Range Rover Velar, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels must be hub-centric; use hub-centric rings to avoid vibration. Offset should stay near 45mm; deviations affect handling and clearance. Lug nuts are 14x1.5 thread pitch; ensure correct seat type (ball or conical) to prevent loosening. Always verify load rating matches vehicle weight.
Historical Fitment Data Reference
In our dataset, Land Rover Range Rover Velar appears from 2018 to 2024 (7 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles to 103 ft-lbs (140 Nm).
- ✅ Avoid spacers; they alter offset and stress hubs.
- ✅ Check brake caliper clearance with aftermarket wheels; Velar has large brakes.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Land Rover Range Rover Velar — Frequently Asked Questions
What is the bolt pattern for a 2020 Land Rover Range Rover Velar?
The 2020 Land Rover Range Rover Velar uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45mm.
What other years of Land Rover Range Rover Velar have the same bolt pattern as the 2020?
The Land Rover Range Rover Velar uses the 5x108 pattern from 2018 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
What is the factory wheel offset for a 2020 Land Rover Range Rover Velar?
The OEM offset for the 2020 Range Rover Velar is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2020 Land Rover?
The 2020 Range Rover Velar uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2020 Land Rover Range Rover Velar?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What does 45mm offset mean for the 2020 Range Rover Velar?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Land Rover.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset