1995 Volvo 940 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1995 Volvo 940, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1995 940 — Year-Specific Fitment Context
The 1995 model year is the final year of the Volvo 940's 5x108 bolt pattern run (since 1992). Wheels from any 1992–1995 Volvo 940 are cross-compatible with the 1995 model.
Volvo 940 Bolt Pattern by Year
The table below shows how the 940's wheel specifications have changed over the years. The 1995 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1995 Volvo 940
For your 1995 Volvo 940, the bolt pattern is 5x108 with a center bore of 63.4mm. Aftermarket wheels often have a larger bore, so hub-centric rings (63.4mm ID to wheel's bore) are essential to prevent vibrations and ensure proper load transfer. The offset is critical: stock is around 50mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 14x1.5 thread pitch with a conical (60-degree) or ball seat matching the wheel. Never use incorrect seat types—this can lead to wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volvo 940 appears from 1992 to 1995 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring fitment; rings must be 63.4mm ID.
- ✅ Avoid spacers unless necessary; if used, ensure extended lug studs and proper offset compensation.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1995 Volvo 940 — Frequently Asked Questions
What is the bolt pattern for a 1995 Volvo 940?
The 1995 Volvo 940 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Volvo 940 have the same bolt pattern as the 1995?
The Volvo 940 uses the 5x108 pattern from 1992 through 1995. Wheels from any of these model years are dimensionally compatible with the 1995, provided the offset and center bore also match.
Will wheels from another Volvo fit my 1995 940?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
What is the factory wheel offset for a 1995 Volvo 940?
The OEM offset for the 1995 940 is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 1995 Volvo 940?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 1995 Volvo 940?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 50mm, and a center bore of at least 63.4mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset