2008 Volvo S80 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Volvo S80, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 52,5 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2008 S80 — Year-Specific Fitment Context
The 2008 Volvo S80 is in year 10 of 18 using the 5x108 pattern (1999–2016). Wheels from any 1999–2016 Volvo S80 are cross-compatible with the 2008 model.
Volvo S80 Bolt Pattern by Year
The table below shows how the S80's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x108 | 65.1 | 49 |
| 2000 | 5x108 | 65.1 | 49 |
| 2001 | 5x108 | 65.1 | 49 |
| 2002 | 5x108 | 65.1 | 49 |
| 2003 | 5x108 | 65.1 | 49 |
| 2004 | 5x108 | 65.1 | 49 |
| 2005 | 5x108 | 65.1 | 49 |
| 2006 | 5x108 | 65.1 | 49 |
| 2007 | 5x108 | 65.1 | 49 |
| ▸ 2008 | 5x108 | 63.4 | 52,5 |
| 2009 | 5x108 | 63.4 | 52,5 |
| 2010 | 5x108 | 63.4 | 52,5 |
| 2011 | 5x108 | 63.4 | 52,5 |
| 2012 | 5x108 | 63.4 | 52,5 |
| 2013 | 5x108 | 63.4 | 52,5 |
| 2014 | 5x108 | 63.4 | 52,5 |
| 2015 | 5x108 | 63.4 | 52,5 |
| 2016 | 5x108 | 63.4 | 52,5 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2008 Volvo S80
For the 2008 Volvo S80, ensure aftermarket wheels match the 5x108 bolt pattern and 63.4mm center bore. Hub-centric rings are mandatory to prevent vibrations and hub damage. The offset range is 52.5mm ±5mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone or ball, depending on wheel). Re-torque after 50-100 miles. Avoid wheels from non-Volvo 5x108 vehicles (e.g., Ford) without verifying bore and offset.
Historical Fitment Data Reference
In our dataset, Volvo S80 appears from 1999 to 2016 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 47.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles.
- ✅ Verify wheel bore is at least 63.4mm; use hub-centric rings if larger.
- ✅ Check offset clearance: 52.5mm is ideal; lower offset may contact fenders, higher may hit struts.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Volvo S80 — Frequently Asked Questions
What is the bolt pattern for a 2008 Volvo S80?
The 2008 Volvo S80 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 52,5mm.
What other years of Volvo S80 have the same bolt pattern as the 2008?
The Volvo S80 uses the 5x108 pattern from 1999 through 2016. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Why is matching the 63.4mm center bore important for the 2008 S80?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2008 Volvo S80 use?
The 2008 Volvo S80 uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How do I measure the bolt pattern on my 2008 Volvo?
The 2008 S80 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2008 Volvo S80?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 52,5mm, and a center bore of at least 63.4mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset