2002 Volvo S80 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Volvo S80, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2002 S80 — Year-Specific Fitment Context
The 2002 Volvo S80 is in year 4 of 18 using the 5x108 pattern (1999–2016). Wheels from any 1999–2016 Volvo S80 are cross-compatible with the 2002 model.
Volvo S80 Bolt Pattern by Year
The table below shows how the S80's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x108 | 65.1 | 49 |
| 2000 | 5x108 | 65.1 | 49 |
| 2001 | 5x108 | 65.1 | 49 |
| ▸ 2002 | 5x108 | 65.1 | 49 |
| 2003 | 5x108 | 65.1 | 49 |
| 2004 | 5x108 | 65.1 | 49 |
| 2005 | 5x108 | 65.1 | 49 |
| 2006 | 5x108 | 65.1 | 49 |
| 2007 | 5x108 | 65.1 | 49 |
| 2008 | 5x108 | 63.4 | 52,5 |
| 2009 | 5x108 | 63.4 | 52,5 |
| 2010 | 5x108 | 63.4 | 52,5 |
| 2011 | 5x108 | 63.4 | 52,5 |
| 2012 | 5x108 | 63.4 | 52,5 |
| 2013 | 5x108 | 63.4 | 52,5 |
| 2014 | 5x108 | 63.4 | 52,5 |
| 2015 | 5x108 | 63.4 | 52,5 |
| 2016 | 5x108 | 63.4 | 52,5 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2002 Volvo S80
For your 2002 Volvo S80, the bolt pattern is 5x108 with a center bore of 65.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 49mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—Volvo uses a ball seat, not conical. Using incorrect lug nuts can lead to wheel detachment. Stick to wheels from 1999–2016 S80 models for guaranteed fitment.
Historical Fitment Data Reference
In our dataset, Volvo S80 appears from 1999 to 2016 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 47.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with a center bore smaller than 65.1mm; they will not fit without machining.
- ✅ Check brake caliper clearance when using wheels with offset below 44mm or above 54mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Volvo S80 — Frequently Asked Questions
What is the bolt pattern for a 2002 Volvo S80?
The 2002 Volvo S80 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 49mm.
What other years of Volvo S80 have the same bolt pattern as the 2002?
The Volvo S80 uses the 5x108 pattern from 1999 through 2016. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
What is the PCD for a 2002 Volvo S80?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2002 S80, the PCD is 5x108.
How tight should I torque the lug nuts on a 2002 Volvo S80?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2002 Volvo S80?
The factory center bore (hub bore) for the 2002 Volvo S80 is 65.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 2002 Volvo S80?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 49mm, and a center bore of at least 65.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset