2009 Volvo S80 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Volvo S80, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 52,5 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 S80 — Year-Specific Fitment Context
The 2009 Volvo S80 is in year 11 of 18 using the 5x108 pattern (1999–2016). Wheels from any 1999–2016 Volvo S80 are cross-compatible with the 2009 model.
Volvo S80 Bolt Pattern by Year
The table below shows how the S80's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x108 | 65.1 | 49 |
| 2000 | 5x108 | 65.1 | 49 |
| 2001 | 5x108 | 65.1 | 49 |
| 2002 | 5x108 | 65.1 | 49 |
| 2003 | 5x108 | 65.1 | 49 |
| 2004 | 5x108 | 65.1 | 49 |
| 2005 | 5x108 | 65.1 | 49 |
| 2006 | 5x108 | 65.1 | 49 |
| 2007 | 5x108 | 65.1 | 49 |
| 2008 | 5x108 | 63.4 | 52,5 |
| ▸ 2009 | 5x108 | 63.4 | 52,5 |
| 2010 | 5x108 | 63.4 | 52,5 |
| 2011 | 5x108 | 63.4 | 52,5 |
| 2012 | 5x108 | 63.4 | 52,5 |
| 2013 | 5x108 | 63.4 | 52,5 |
| 2014 | 5x108 | 63.4 | 52,5 |
| 2015 | 5x108 | 63.4 | 52,5 |
| 2016 | 5x108 | 63.4 | 52,5 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2009 Volvo S80
For the 2009 Volvo S80, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The offset range is tight: 52.5mm is ideal; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type—Volvo uses ball seats, not conical. Mixing seat types can lead to wheel loosening. Verify lug nut length to avoid bottoming out. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Volvo S80 appears from 1999 to 2016 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 47.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles of driving.
- ✅ Avoid wheels from pre-1999 Volvos (4x108 pattern) or post-2016 models (newer patterns).
- ✅ Check for TPMS sensor compatibility; aftermarket wheels may require new sensors or bands.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Volvo S80 — Frequently Asked Questions
What is the bolt pattern for a 2009 Volvo S80?
The 2009 Volvo S80 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 52,5mm.
What other years of Volvo S80 have the same bolt pattern as the 2009?
The Volvo S80 uses the 5x108 pattern from 1999 through 2016. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
Will wheels from another Volvo fit my 2009 S80?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 63.4mm.
Can I put aftermarket wheels on my 2009 Volvo S80?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 52,5mm, and a center bore of at least 63.4mm (using hub rings if larger).
What lug nut size does the 2009 Volvo S80 use?
The 2009 Volvo S80 uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Why is matching the 63.4mm center bore important for the 2009 S80?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset