1999 Volvo S80 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Volvo S80, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 100 ft-lbs (135 Nm) |
1999 S80 — Year-Specific Fitment Context
The 1999 model year marks the beginning of the Volvo S80's 5x108 bolt pattern era, which continued through 2016 (18 consecutive years). Wheels from any 1999–2016 Volvo S80 are cross-compatible with the 1999 model.
Volvo S80 Bolt Pattern by Year
The table below shows how the S80's wheel specifications have changed over the years. The 1999 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1999 | 5x108 | 65.1 | 49 |
| 2000 | 5x108 | 65.1 | 49 |
| 2001 | 5x108 | 65.1 | 49 |
| 2002 | 5x108 | 65.1 | 49 |
| 2003 | 5x108 | 65.1 | 49 |
| 2004 | 5x108 | 65.1 | 49 |
| 2005 | 5x108 | 65.1 | 49 |
| 2006 | 5x108 | 65.1 | 49 |
| 2007 | 5x108 | 65.1 | 49 |
| 2008 | 5x108 | 63.4 | 52,5 |
| 2009 | 5x108 | 63.4 | 52,5 |
| 2010 | 5x108 | 63.4 | 52,5 |
| 2011 | 5x108 | 63.4 | 52,5 |
| 2012 | 5x108 | 63.4 | 52,5 |
| 2013 | 5x108 | 63.4 | 52,5 |
| 2014 | 5x108 | 63.4 | 52,5 |
| 2015 | 5x108 | 63.4 | 52,5 |
| 2016 | 5x108 | 63.4 | 52,5 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1999 Volvo S80
For your 1999 Volvo S80, the bolt pattern is 5x108 with a center bore of 65.1mm. When selecting aftermarket wheels, ensure they are hub-centric or use hub-centric rings to prevent vibration. The offset is critical: stock is 49mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (14x1.50) and seat type (cone seat for steel wheels, ball seat for Volvo alloys). Never mix seat types. Re-torque after 50-100 miles. Wheels from 1999-2016 S80 models are direct fit.
Historical Fitment Data Reference
In our dataset, Volvo S80 appears from 1999 to 2016 (18 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 47.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 Nm (76 lb-ft) after 50-100 miles of driving.
- ✅ Avoid using aftermarket wheels with a center bore larger than 65.1mm without hub-centric rings; vibration and lug stud stress may occur.
- ✅ Verify offset: +49mm is stock; offsets from +44mm to +54mm typically clear brakes and suspension, but test fitment is recommended.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Volvo S80 — Frequently Asked Questions
What is the bolt pattern for a 1999 Volvo S80?
The 1999 Volvo S80 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 49mm.
What other years of Volvo S80 have the same bolt pattern as the 1999?
The Volvo S80 uses the 5x108 pattern from 1999 through 2016. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Do 1999 Volvo S80s use lug bolts or lug nuts?
The 1999 S80 requires B 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 1999 Volvo?
The 1999 S80 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 1999 Volvo S80?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 49mm, and a center bore of at least 65.1mm (using hub rings if larger).
Will wheels from another Volvo fit my 1999 S80?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset