2007 Volvo V70 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Volvo V70, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | B 14x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 49 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2007 V70 — Year-Specific Fitment Context
The 2007 Volvo V70 is in year 10 of 13 using the 5x108 pattern (1998–2010). Wheels from any 1998–2010 Volvo V70 are cross-compatible with the 2007 model.
Volvo V70 Bolt Pattern by Year
The table below shows how the V70's wheel specifications have changed over the years. The 2007 model year is highlighted.
Fitment Notes
The 2007 Volvo V70 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo V70 appears from 1998 to 2010 (13 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 7.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2007 Volvo V70 — Frequently Asked Questions
What is the bolt pattern for a 2007 Volvo V70?
The 2007 Volvo V70 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 49mm.
What other years of Volvo V70 have the same bolt pattern as the 2007?
The Volvo V70 uses the 5x108 pattern from 1998 through 2010. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What lug nut size does the 2007 Volvo V70 use?
The 2007 Volvo V70 uses B 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2007 Volvo V70?
Refer to your owner's manual for exact specs, but always tighten the B 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2007 Volvo?
The 2007 V70 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2007 Volvo V70?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 65.1mm center bore. Also verify that you have enough thread engagement for your B 14x1.50 hardware.
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo V70 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1998-2010 (13 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 7.0 mm.
- Observed center-bore variants: 2 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2007 Volvo V70, please report it via our About page contact so we can verify and update this record.