2026 Volvo V90CC Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Volvo V90CC is 5x108. It has a center bore of 63.4 mm, an offset range of 35-45, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Volvo V90CC Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 V90CC — Year-Specific Fitment Context
The 2026 model year is the final year of the Volvo V90CC's 5x108 bolt pattern run (since 2024). Wheels from any 2024–2026 Volvo V90CC are cross-compatible with the 2026 model.
Volvo V90CC Bolt Pattern by Year
Looking for all generations? View the complete Volvo V90CC (2024–2026) Bolt Pattern & Generation Guide →
The table below shows how the V90CC's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Volvo V90CC Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Volvo V90CC, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2026 Volvo WHL | 63.4 mm (Exact) | 35-50 | 14x1.5 (Ball) |
| 2024 Volvo WHLB | 63.4 mm (Exact) | Not Applicable | 14x1.5 (Ball) |
| 2025 Volvo XC40 | 63.4 mm (Exact) | 45-50 | 14x1.5 (Ball) |
| 2025 Volvo XC40 Recharge | 63.4 mm (Exact) | 45-50 | 14x1.5 (Cone) |
| 2019 Volvo XC60 | 63.3 mm (Exact) | 50,5 | B 14x1.50 (Cone) |
| 2009 Volvo XC70 | 63.4 mm (Exact) | 50 | B 14x1.50 (Cone) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1992 Lincoln Continental | 70.5 mm | 70.5mm → 63.4mm |
40 |
| 2005 Maserati GranSport | 67.1 mm | 67.1mm → 63.4mm |
53 |
| 1992 Volvo 240 | 65.1 mm | 65.1mm → 63.4mm |
25 |
| 1998 Volvo C70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Volvo V90CC — Frequently Asked Questions
What is the bolt pattern for a 2026 Volvo V90CC?
The 2026 Volvo V90CC uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 35-45mm.
What other years of Volvo V90CC have the same bolt pattern as the 2026?
The Volvo V90CC uses the 5x108 pattern from 2024 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the factory wheel offset for a 2026 Volvo V90CC?
The OEM offset for the 2026 V90CC is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2026 Volvo V90CC?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 V90CC, the PCD is 5x108.
What does 35-45mm offset mean for the 2026 V90CC?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
What is the center bore of a 2026 Volvo V90CC?
The factory center bore (hub bore) for the 2026 Volvo V90CC is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →