2024 Volvo XC60 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Volvo XC60, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2024 XC60 — Year-Specific Fitment Context
The 2024 model year is the final year of the Volvo XC60's 5x108 bolt pattern run (since 2010). Wheels from any 2010–2024 Volvo XC60 are cross-compatible with the 2024 model.
Volvo XC60 Bolt Pattern by Year
The table below shows how the XC60's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2010 | 5x108 | 63.4 | 50 |
| 2011 | 5x108 | 63.4 | 50 |
| 2012 | 5x108 | 63.4 | 50 |
| 2013 | 5x108 | 63.4 | 50 |
| 2014 | 5x108 | 63.4 | 50 |
| 2015 | 5x108 | 63.4 | 50 |
| 2016 | 5x108 | 63.4 | 50 |
| 2017 | 5x108 | 63.4 | 50 |
| 2018 | 5x108 | 63.4 | 50 |
| 2019 | 5x108 | 63.3 | 50,5 |
| 2020 | 5x108 | 63.4 | 45-50 |
| 2021 | 5x108 | 63.4 | 45-50 |
| 2022 | 5x108 | 63.4 | 45-50 |
| 2023 | 5x108 | 63.4 | 45-50 |
| ▸ 2024 | 5x108 | 63.4 | 45-50 |
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2024 Volvo XC60
For the 2024 Volvo XC60, the 5x108 bolt pattern and 63.4mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. The offset range is tight: 45-50mm. Sticking to this range avoids rubbing on struts or fenders. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—Volvo uses ball seats, not conical. Using incorrect lug nuts can cause wheel loosening. This is the final year for 5x108; 2025+ models switch to 5x120.65, so wheels are not forward-compatible.
Historical Fitment Data Reference
In our dataset, Volvo XC60 appears from 2010 to 2024 (15 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 100.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using aftermarket wheels with a center bore larger than 63.4mm without hub-centric rings; otherwise, vibrations may occur.
- ✅ Verify that aftermarket wheels have a ball seat lug nut interface; conical seat nuts can damage the wheel or hub.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Volvo XC60 — Frequently Asked Questions
What is the bolt pattern for a 2024 Volvo XC60?
The 2024 Volvo XC60 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-50mm.
What other years of Volvo XC60 have the same bolt pattern as the 2024?
The Volvo XC60 uses the 5x108 pattern from 2010 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2024 Volvo XC60?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2024 Volvo XC60s use lug bolts or lug nuts?
The 2024 XC60 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2024 Volvo XC60?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45-50mm, and a center bore of at least 63.4mm (using hub rings if larger).
Why is matching the 63.4mm center bore important for the 2024 XC60?
The 63.4mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset