2005 Acura TL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Acura TL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2005 TL — Year-Specific Fitment Context
The 2005 Acura TL is in year 11 of 14 using the 5x114.3 pattern (1995–2008). Wheels from any 1995–2008 Acura TL are cross-compatible with the 2005 model. Across its full production run (1995–2014), the TL has also used: 5x120.
Acura TL Bolt Pattern by Year
The table below shows how the TL's wheel specifications have changed over the years. The 2005 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| ▸ 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x114.3 | 64.1 | 45 |
| 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 55 |
| 2010 | 5x120 | 64.1 | 55 |
| 2011 | 5x120 | 64.1 | 55 |
| 2012 | 5x120 | 64.1 | 55 |
| 2013 | 5x120 | 64.1 | 55 |
| 2014 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2005 Acura TL
For your 2005 Acura TL, the 5x114.3 bolt pattern is shared with 1995–2008 TL models, ensuring cross-compatibility. The 64.1mm center bore is critical; aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load distribution. Offset is sensitive—stick to 45mm ±5mm to avoid rubbing or clearance issues. Always use 12x1.5 lug nuts with the correct seat type (cone or ball) matching your wheels; mismatched seats can cause loosening or wheel damage. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Acura TL appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50–100 miles of driving.
- ✅ Verify wheel bore diameter; use hub-centric rings if aftermarket bore exceeds 64.1mm.
- ✅ Avoid spacers unless hub-centric; they alter offset and may require longer studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Acura TL — Frequently Asked Questions
What is the bolt pattern for a 2005 Acura TL?
The 2005 Acura TL uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura TL have the same bolt pattern as the 2005?
The Acura TL uses the 5x114.3 pattern from 1995 through 2008. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2005 Acura TL?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2005 Acura TL?
The OEM offset for the 2005 TL is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2005 Acura TL?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 64.1mm (using hub rings if larger).
Will wheels from another Acura fit my 2005 TL?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset