2000 Acura TL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Acura TL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2000 TL — Year-Specific Fitment Context
The 2000 Acura TL is in year 6 of 14 using the 5x114.3 pattern (1995–2008). Wheels from any 1995–2008 Acura TL are cross-compatible with the 2000 model. Across its full production run (1995–2014), the TL has also used: 5x120.
Acura TL Bolt Pattern by Year
The table below shows how the TL's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| ▸ 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x114.3 | 64.1 | 45 |
| 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 55 |
| 2010 | 5x120 | 64.1 | 55 |
| 2011 | 5x120 | 64.1 | 55 |
| 2012 | 5x120 | 64.1 | 55 |
| 2013 | 5x120 | 64.1 | 55 |
| 2014 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2000 Acura TL
For your 2000 Acura TL, the 5x114.3 bolt pattern is shared with 1995–2008 TL models, but the center bore is 64.1mm. Aftermarket wheels often have a larger bore (e.g., 73.1mm), so you must use hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a ball seat, while many aftermarket wheels require a conical (60-degree) seat. Using the wrong seat can lead to loose wheels and accidents. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Acura TL appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings with aftermarket wheels to match the 64.1mm center bore; plastic rings are fine for street use, but aluminum is better for track.
- ✅ Factory offset is 45mm; going lower (e.g., 35mm) pushes wheels outward and may require fender rolling, while higher offset (e.g., 50mm) may cause inner clearance issues.
- ✅ Always re-torque lug nuts to 80 ft-lbs after 50–100 miles of driving, and check for proper seat engagement (ball vs. conical) to avoid loosening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Acura TL — Frequently Asked Questions
What is the bolt pattern for a 2000 Acura TL?
The 2000 Acura TL uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura TL have the same bolt pattern as the 2000?
The Acura TL uses the 5x114.3 pattern from 1995 through 2008. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
What is the center bore of a 2000 Acura TL?
The factory center bore (hub bore) for the 2000 Acura TL is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the factory wheel offset for a 2000 Acura TL?
The OEM offset for the 2000 TL is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 2000 Acura?
The 2000 TL uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I put aftermarket wheels on my 2000 Acura TL?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 45mm, and a center bore of at least 64.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset