2006 Acura TL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Acura TL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2006 TL — Year-Specific Fitment Context
The 2006 Acura TL is in year 12 of 14 using the 5x114.3 pattern (1995–2008). Wheels from any 1995–2008 Acura TL are cross-compatible with the 2006 model. Across its full production run (1995–2014), the TL has also used: 5x120.
Acura TL Bolt Pattern by Year
The table below shows how the TL's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| ▸ 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x114.3 | 64.1 | 45 |
| 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 55 |
| 2010 | 5x120 | 64.1 | 55 |
| 2011 | 5x120 | 64.1 | 55 |
| 2012 | 5x120 | 64.1 | 55 |
| 2013 | 5x120 | 64.1 | 55 |
| 2014 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2006 Acura TL
For your 2006 Acura TL, the bolt pattern is 5x114.3 with a center bore of 64.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—Acura typically uses cone seats. Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles. Wheels from 1995-2008 TL models are direct fit, but verify offset and bore.
Historical Fitment Data Reference
In our dataset, Acura TL appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels with a larger center bore, install hub-centric rings (64.1mm ID to wheel bore OD) to avoid vibrations.
- ✅ Check brake caliper clearance: some aftermarket wheels may require spacers if offset is lower than 40mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Acura TL — Frequently Asked Questions
What is the bolt pattern for a 2006 Acura TL?
The 2006 Acura TL uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura TL have the same bolt pattern as the 2006?
The Acura TL uses the 5x114.3 pattern from 1995 through 2008. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
What is the center bore of a 2006 Acura TL?
The factory center bore (hub bore) for the 2006 Acura TL is 64.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2006 Acura TL?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 64.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
What does 45mm offset mean for the 2006 TL?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Acura.
Why is matching the 64.1mm center bore important for the 2006 TL?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset