2008 Acura TL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Acura TL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 TL — Year-Specific Fitment Context
The 2008 model year is the final year of the Acura TL's 5x114.3 bolt pattern run (since 1995). Wheels from any 1995–2008 Acura TL are cross-compatible with the 2008 model. Important: starting in 2009, Acura switched to 5x120 — those wheels will not fit the 2008 model. Across its full production run (1995–2014), the TL has also used: 5x120.
Acura TL Bolt Pattern by Year
The table below shows how the TL's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x114.3 | 64.1 | 45 |
| ▸ 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 55 |
| 2010 | 5x120 | 64.1 | 55 |
| 2011 | 5x120 | 64.1 | 55 |
| 2012 | 5x120 | 64.1 | 55 |
| 2013 | 5x120 | 64.1 | 55 |
| 2014 | 5x120 | 64.1 | 55 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Acura TL
For your 2008 Acura TL, the critical fitment specs are: bolt pattern 5x114.3, center bore 64.1mm, offset ~45mm, and lug nuts 12x1.5 with conical/ball seat. The center bore is hub-centric; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration. Offset is sensitive: staying within ±5mm of 45mm ensures proper clearance and handling. Never use lug nuts with incorrect thread pitch or seat type—conical (60-degree) or ball seat must match the wheel. Re-torque after 50-100 miles. Note: 2009+ TL uses 5x120—those wheels will not fit.
Historical Fitment Data Reference
In our dataset, Acura TL appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (64.1mm to wheel bore) to avoid vibration and ensure load is on the hub, not the studs.
- ✅ Stick to offset 40-50mm; lower offset (e.g., 35mm) may rub fenders, higher (55mm) may contact suspension.
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles; use a torque wrench, not an impact gun, to prevent over-tightening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Acura TL — Frequently Asked Questions
What is the bolt pattern for a 2008 Acura TL?
The 2008 Acura TL uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 45mm.
What other years of Acura TL have the same bolt pattern as the 2008?
The Acura TL uses the 5x114.3 pattern from 1995 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Will 2009 Acura TL wheels fit a 2008 model?
No. The 2009 Acura TL switched to a 5x120 bolt pattern, which is not compatible with the 2008 model's 5x114.3. Using mismatched patterns is unsafe.
Why is matching the 64.1mm center bore important for the 2008 TL?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What lug nut size does the 2008 Acura TL use?
The 2008 Acura TL uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Acura fit my 2008 TL?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset