2014 Acura TL Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Acura TL, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 55 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 TL — Year-Specific Fitment Context
The 2014 model year is the final year of the Acura TL's 5x120 bolt pattern run (since 2009). Wheels from any 2009–2014 Acura TL are cross-compatible with the 2014 model. Across its full production run (1995–2014), the TL has also used: 5x114.3.
Acura TL Bolt Pattern by Year
The table below shows how the TL's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 64.1 | 45 |
| 1996 | 5x114.3 | 64.1 | 45 |
| 1997 | 5x114.3 | 64.1 | 45 |
| 1998 | 5x114.3 | 64.1 | 45 |
| 1999 | 5x114.3 | 64.1 | 45 |
| 2000 | 5x114.3 | 64.1 | 45 |
| 2001 | 5x114.3 | 64.1 | 45 |
| 2002 | 5x114.3 | 64.1 | 45 |
| 2003 | 5x114.3 | 64.1 | 45 |
| 2004 | 5x114.3 | 64.1 | 45 |
| 2005 | 5x114.3 | 64.1 | 45 |
| 2006 | 5x114.3 | 64.1 | 45 |
| 2007 | 5x114.3 | 64.1 | 45 |
| 2008 | 5x114.3 | 64.1 | 45 |
| 2009 | 5x120 | 64.1 | 55 |
| 2010 | 5x120 | 64.1 | 55 |
| 2011 | 5x120 | 64.1 | 55 |
| 2012 | 5x120 | 64.1 | 55 |
| 2013 | 5x120 | 64.1 | 55 |
| ▸ 2014 | 5x120 | 64.1 | 55 |
5x120 Pattern Context
This bolt pattern appears on 633 vehicles in our current database and is considered common.
Examples of other vehicles using 5x120:
Expert Buying Guide for 2014 Acura TL
For the 2014 Acura TL, the bolt pattern is 5x120 with a center bore of 64.1mm. When selecting aftermarket wheels, ensure hub-centric rings are used to match the bore precisely, preventing vibrations. The factory offset is 55mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type—factory uses cone seat; aftermarket wheels may require ball seat or different lug nuts. Improper lug nut selection can lead to wheel loosening. This model is the last year of the 5x120 pattern (2009–2014); wheels from those years are direct fit. Earlier TLs (1995–2008) use 5x114.3 and are not compatible without adapters.
Historical Fitment Data Reference
In our dataset, Acura TL appears from 1995 to 2014 (20 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 10.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 64.1mm without hub-centric rings; vibrations may occur.
- ✅ Check inner clearance for aftermarket wheels; offset lower than 50mm may contact struts or fenders.
- ⚠️ Confirm bolt pattern carefully. 5x120 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2014 Acura TL — Frequently Asked Questions
What is the bolt pattern for a 2014 Acura TL?
The 2014 Acura TL uses a 5x120 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 55mm.
What other years of Acura TL have the same bolt pattern as the 2014?
The Acura TL uses the 5x120 pattern from 2009 through 2014. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
What does 55mm offset mean for the 2014 TL?
An offset of 55mm means the wheel's mounting surface is 55mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Acura.
What is the factory wheel offset for a 2014 Acura TL?
The OEM offset for the 2014 TL is typically around 55mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Will wheels from another Acura fit my 2014 TL?
Only if they share the exact same 5x120 bolt pattern, a compatible offset, and a center bore equal to or larger than 64.1mm.
Can I put aftermarket wheels on my 2014 Acura TL?
Absolutely. Just ensure the aftermarket wheels have a 5x120 bolt pattern, an offset near 55mm, and a center bore of at least 64.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset