2012 Cadillac Escalade Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Cadillac Escalade, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2012 Escalade — Year-Specific Fitment Context
The 2012 Cadillac Escalade is in year 14 of 26 using the 6x139.7 pattern (1999–2024). Wheels from any 1999–2024 Cadillac Escalade are cross-compatible with the 2012 model.
Cadillac Escalade Bolt Pattern by Year
The table below shows how the Escalade's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 6x139.7 | 78.1 | 32 |
| 2000 | 6x139.7 | 78.1 | 32 |
| 2002 | 6x139.7 | 78.1 | 32 |
| 2003 | 6x139.7 | 78.1 | 32 |
| 2004 | 6x139.7 | 78.1 | 32 |
| 2005 | 6x139.7 | 78.1 | 32 |
| 2006 | 6x139.7 | 78.1 | 32 |
| 2007 | 6x139.7 | 78.1 | 32 |
| 2008 | 6x139.7 | 78.1 | 32 |
| 2009 | 6x139.7 | 78.1 | 32 |
| 2010 | 6x139.7 | 78.1 | 32 |
| 2011 | 6x139.7 | 78.1 | 32 |
| ▸ 2012 | 6x139.7 | 78.1 | 32 |
| 2013 | 6x139.7 | 78.1 | 32 |
| 2014 | 6x139.7 | 78.1 | 24 |
| 2015 | 6x139.7 | 78.1 | 24 |
| 2016 | 6x139.7 | 78.1 | 24 |
| 2017 | 6x139.7 | 78.1 | 24 |
| 2018 | 6x139.7 | 78.1 | 24 |
| 2019 | 6x139.7 | 78.1 | 24 |
| 2020 | 6x139.7 | 78.1 | 24 |
| 2021 | 6x139.7 | 78.1 | 24 |
| 2022 | 6x139.7 | 78.1 | 24 |
| 2023 | 6x139.7 | 78.1 | 24 |
| 2024 | 6x139.7 | 78.1 | 24 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2012 Cadillac Escalade
The 2012 Cadillac Escalade uses a 6x139.7 bolt pattern with a 78.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive; the factory offset is 32mm, but a range of 20-44mm is acceptable depending on tire width and suspension setup. Always verify lug nut thread pitch (14x1.50) and seat type—factory wheels use a cone seat, while aftermarket may require ball seat or shank-style nuts. Improper lug nut seating can lead to wheel detachment. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Cadillac Escalade appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles to account for settling.
- ✅ Avoid using wheels with a center bore larger than 78.1mm without hub rings; vibrations may occur.
- ✅ Check for caliper clearance when using wheels with offset below 20mm or above 44mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Cadillac Escalade — Frequently Asked Questions
What is the bolt pattern for a 2012 Cadillac Escalade?
The 2012 Cadillac Escalade uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 32mm.
What other years of Cadillac Escalade have the same bolt pattern as the 2012?
The Cadillac Escalade uses the 6x139.7 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
Can I use spacers on my 2012 Cadillac Escalade?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
What is the PCD for a 2012 Cadillac Escalade?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Escalade, the PCD is 6x139.7.
Do 2012 Cadillac Escalades use lug bolts or lug nuts?
The 2012 Escalade requires N 14x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2012 Cadillac Escalade use?
The 2012 Cadillac Escalade uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset