2013 Cadillac Escalade Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Cadillac Escalade, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2013 Escalade — Year-Specific Fitment Context
The 2013 Cadillac Escalade is in year 15 of 26 using the 6x139.7 pattern (1999–2024). Wheels from any 1999–2024 Cadillac Escalade are cross-compatible with the 2013 model.
Cadillac Escalade Bolt Pattern by Year
The table below shows how the Escalade's wheel specifications have changed over the years. The 2013 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 6x139.7 | 78.1 | 32 |
| 2000 | 6x139.7 | 78.1 | 32 |
| 2002 | 6x139.7 | 78.1 | 32 |
| 2003 | 6x139.7 | 78.1 | 32 |
| 2004 | 6x139.7 | 78.1 | 32 |
| 2005 | 6x139.7 | 78.1 | 32 |
| 2006 | 6x139.7 | 78.1 | 32 |
| 2007 | 6x139.7 | 78.1 | 32 |
| 2008 | 6x139.7 | 78.1 | 32 |
| 2009 | 6x139.7 | 78.1 | 32 |
| 2010 | 6x139.7 | 78.1 | 32 |
| 2011 | 6x139.7 | 78.1 | 32 |
| 2012 | 6x139.7 | 78.1 | 32 |
| ▸ 2013 | 6x139.7 | 78.1 | 32 |
| 2014 | 6x139.7 | 78.1 | 24 |
| 2015 | 6x139.7 | 78.1 | 24 |
| 2016 | 6x139.7 | 78.1 | 24 |
| 2017 | 6x139.7 | 78.1 | 24 |
| 2018 | 6x139.7 | 78.1 | 24 |
| 2019 | 6x139.7 | 78.1 | 24 |
| 2020 | 6x139.7 | 78.1 | 24 |
| 2021 | 6x139.7 | 78.1 | 24 |
| 2022 | 6x139.7 | 78.1 | 24 |
| 2023 | 6x139.7 | 78.1 | 24 |
| 2024 | 6x139.7 | 78.1 | 24 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2013 Cadillac Escalade
The 2013 Cadillac Escalade uses a 6x139.7 bolt pattern with a 78.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 32mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.50) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel detachment. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Cadillac Escalade appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 78.1mm without hub-centric rings; otherwise, vibrations may occur.
- ✅ Check for brake caliper clearance when using wheels with offset less than 27mm or greater than 37mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Cadillac Escalade — Frequently Asked Questions
What is the bolt pattern for a 2013 Cadillac Escalade?
The 2013 Cadillac Escalade uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 32mm.
What other years of Cadillac Escalade have the same bolt pattern as the 2013?
The Cadillac Escalade uses the 6x139.7 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2013 Cadillac Escalade?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 32mm, and a center bore of at least 78.1mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2013 Cadillac Escalade?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What does 32mm offset mean for the 2013 Escalade?
An offset of 32mm means the wheel's mounting surface is 32mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
Why is matching the 78.1mm center bore important for the 2013 Escalade?
The 78.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset