2007 Cadillac Escalade Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Cadillac Escalade, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2007 Escalade — Year-Specific Fitment Context
The 2007 Cadillac Escalade is in year 9 of 26 using the 6x139.7 pattern (1999–2024). Wheels from any 1999–2024 Cadillac Escalade are cross-compatible with the 2007 model.
Cadillac Escalade Bolt Pattern by Year
The table below shows how the Escalade's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 6x139.7 | 78.1 | 32 |
| 2000 | 6x139.7 | 78.1 | 32 |
| 2002 | 6x139.7 | 78.1 | 32 |
| 2003 | 6x139.7 | 78.1 | 32 |
| 2004 | 6x139.7 | 78.1 | 32 |
| 2005 | 6x139.7 | 78.1 | 32 |
| 2006 | 6x139.7 | 78.1 | 32 |
| ▸ 2007 | 6x139.7 | 78.1 | 32 |
| 2008 | 6x139.7 | 78.1 | 32 |
| 2009 | 6x139.7 | 78.1 | 32 |
| 2010 | 6x139.7 | 78.1 | 32 |
| 2011 | 6x139.7 | 78.1 | 32 |
| 2012 | 6x139.7 | 78.1 | 32 |
| 2013 | 6x139.7 | 78.1 | 32 |
| 2014 | 6x139.7 | 78.1 | 24 |
| 2015 | 6x139.7 | 78.1 | 24 |
| 2016 | 6x139.7 | 78.1 | 24 |
| 2017 | 6x139.7 | 78.1 | 24 |
| 2018 | 6x139.7 | 78.1 | 24 |
| 2019 | 6x139.7 | 78.1 | 24 |
| 2020 | 6x139.7 | 78.1 | 24 |
| 2021 | 6x139.7 | 78.1 | 24 |
| 2022 | 6x139.7 | 78.1 | 24 |
| 2023 | 6x139.7 | 78.1 | 24 |
| 2024 | 6x139.7 | 78.1 | 24 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2007 Cadillac Escalade
For your 2007 Cadillac Escalade, the 6x139.7 bolt pattern is shared with 1999–2024 models, ensuring broad wheel compatibility. However, the 78.1mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; the factory 32mm offset maintains suspension geometry and brake clearance. Deviating more than ±10mm may cause rubbing or handling issues. Always use the correct lug nuts: M14x1.50 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen or damage the wheel. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Cadillac Escalade appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lb after 50 miles of driving, as wheels can settle.
- ✅ When using aftermarket wheels, verify that the center bore is at least 78.1mm; use hub-centric rings if larger.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and do not exceed 5mm to maintain proper offset.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Cadillac Escalade — Frequently Asked Questions
What is the bolt pattern for a 2007 Cadillac Escalade?
The 2007 Cadillac Escalade uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 32mm.
What other years of Cadillac Escalade have the same bolt pattern as the 2007?
The Cadillac Escalade uses the 6x139.7 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2007 Cadillac?
The 2007 Escalade uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2007 Cadillac Escalade?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Escalade, the PCD is 6x139.7.
How tight should I torque the lug nuts on a 2007 Cadillac Escalade?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2007 Cadillac Escalade?
The factory center bore (hub bore) for the 2007 Cadillac Escalade is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset