2026 Cadillac Escalade Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Cadillac Escalade is 6x139.7 (6x5.5"). It has a center bore of 78.1 mm, an offset range of 24-31, and utilizes 14x1.5 (Flat seat, 22mm hex) fasteners tightened to 140 ft-lbs (190 Nm).
2026 Cadillac Escalade Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Center Bore (Hub Bore) | 78.1 mm |
| Offset Range (ET) | 24-31 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 22mm |
| Wheel Torque Specs | 140 ft-lbs (190 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2026 Escalade — Year-Specific Fitment Context
The 2026 model year is the final year of the Cadillac Escalade's 6x139.7 bolt pattern run (since 1999). Wheels from any 1999–2026 Cadillac Escalade are cross-compatible with the 2026 model.
Cadillac Escalade Bolt Pattern by Year
Looking for all generations? View the complete Cadillac Escalade (1999–2026) Bolt Pattern & Generation Guide →
The table below shows how the Escalade's wheel specifications have changed over the years. The 2026 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 6x139.7 | 78.1 | 32 |
| 2000 | 6x139.7 | 78.1 | 32 |
| 2002 | 6x139.7 | 78.1 | 32 |
| 2003 | 6x139.7 | 78.1 | 32 |
| 2004 | 6x139.7 | 78.1 | 32 |
| 2005 | 6x139.7 | 78.1 | 32 |
| 2006 | 6x139.7 | 78.1 | 32 |
| 2007 | 6x139.7 | 78.1 | 32 |
| 2008 | 6x139.7 | 78.1 | 32 |
| 2009 | 6x139.7 | 78.1 | 32 |
| 2010 | 6x139.7 | 78.1 | 32 |
| 2011 | 6x139.7 | 78.1 | 32 |
| 2012 | 6x139.7 | 78.1 | 32 |
| 2013 | 6x139.7 | 78.1 | 32 |
| 2014 | 6x139.7 | 78.1 | 24 |
| 2015 | 6x139.7 | 78.1 | 24 |
| 2016 | 6x139.7 | 78.1 | 24 |
| 2017 | 6x139.7 | 78.1 | 24 |
| 2018 | 6x139.7 | 78.1 | 24 |
| 2019 | 6x139.7 | 78.1 | 24 |
| 2020 | 6x139.7 | 78.1 | 24 |
| 2021 | 6x139.7 | 78.1 | 24 |
| 2022 | 6x139.7 | 78.1 | 24 |
| 2023 | 6x139.7 | 78.1 | 24 |
| 2024 | 6x139.7 | 78.1 | 24 |
| 2025 | 6x139.7 | 78.1 | 24-31 |
| ▸ 2026 | 6x139.7 | 78.1 | 24-31 |
2026 Cadillac Escalade Wheel Interchange & Donor Fitment Guide (6x139.7)
The 6x139.7 bolt pattern is shared by 1102 vehicles in our database (common). For safe wheel swaps on the 2026 Cadillac Escalade, donor rims must match the 6x139.7 PCD and have a center bore of at least 78.1 mm:
DIRECT HUB MATCH Same 6x139.7 Pattern & Exact 78.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 GMC Canyon | 78.1 mm (Exact) | 33 | 14x1.5 (Flat) |
| 2023 GMC Canyon Crew Cab | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2025 GMC HUMMER EV SUV | 78.1 mm (Exact) | 24-34 | 14x1.5 (Flat) |
| 2003 GMC Safari Cargo | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2003 GMC Safari Passenger | 78.1 mm (Exact) | 30 | 14x1.5 (Cone) |
| 2025 GMC Savana | 78.1 mm (Exact) | 28-31 | 14x1.5 (Flat) |
HUB RING FITMENT Same 6x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2025 Ford Bronco | 93.1 mm | 93.1mm → 78.1mm |
30-55 |
| 2025 Ford Ranger | 93.1 mm | 93.1mm → 78.1mm |
55 |
| 2019 Ford Ranger SuperCab | 93.1 mm | 93.1mm → 78.1mm |
55 |
| 2024 Ford Ranger SuperCrew | 93.1 mm | 93.1mm → 78.1mm |
55 |
| 2025 Isuzu NPR | 110 mm | 110mm → 78.1mm |
Not Applicable |
| 2025 Isuzu NPR-HD | 110 mm | 110mm → 78.1mm |
Not Applicable |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 140 ft-lbs (190 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Cadillac Escalade — Frequently Asked Questions
What is the bolt pattern for a 2026 Cadillac Escalade?
The 2026 Cadillac Escalade uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 24-31mm.
What other years of Cadillac Escalade have the same bolt pattern as the 2026?
The Cadillac Escalade uses the 6x139.7 pattern from 1999 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2026 Cadillac?
The 2026 Escalade uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2026 Cadillac Escalade?
The factory center bore (hub bore) for the 2026 Cadillac Escalade is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2026 Cadillac Escalade?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2026 Cadillac Escalade?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →