2014 Cadillac Escalade Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2014 Cadillac Escalade, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 24 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2014 Escalade — Year-Specific Fitment Context
The 2014 Cadillac Escalade is in year 16 of 26 using the 6x139.7 pattern (1999–2024). Wheels from any 1999–2024 Cadillac Escalade are cross-compatible with the 2014 model.
Cadillac Escalade Bolt Pattern by Year
The table below shows how the Escalade's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 6x139.7 | 78.1 | 32 |
| 2000 | 6x139.7 | 78.1 | 32 |
| 2002 | 6x139.7 | 78.1 | 32 |
| 2003 | 6x139.7 | 78.1 | 32 |
| 2004 | 6x139.7 | 78.1 | 32 |
| 2005 | 6x139.7 | 78.1 | 32 |
| 2006 | 6x139.7 | 78.1 | 32 |
| 2007 | 6x139.7 | 78.1 | 32 |
| 2008 | 6x139.7 | 78.1 | 32 |
| 2009 | 6x139.7 | 78.1 | 32 |
| 2010 | 6x139.7 | 78.1 | 32 |
| 2011 | 6x139.7 | 78.1 | 32 |
| 2012 | 6x139.7 | 78.1 | 32 |
| 2013 | 6x139.7 | 78.1 | 32 |
| ▸ 2014 | 6x139.7 | 78.1 | 24 |
| 2015 | 6x139.7 | 78.1 | 24 |
| 2016 | 6x139.7 | 78.1 | 24 |
| 2017 | 6x139.7 | 78.1 | 24 |
| 2018 | 6x139.7 | 78.1 | 24 |
| 2019 | 6x139.7 | 78.1 | 24 |
| 2020 | 6x139.7 | 78.1 | 24 |
| 2021 | 6x139.7 | 78.1 | 24 |
| 2022 | 6x139.7 | 78.1 | 24 |
| 2023 | 6x139.7 | 78.1 | 24 |
| 2024 | 6x139.7 | 78.1 | 24 |
Fitment Notes
The 2014 Cadillac Escalade has a bolt pattern of 6x139.7.
Imperial Conversion: This bolt pattern is commonly referred to as 6x5.5" in imperial units. When searching for aftermarket wheels, you may see them listed as 6x5.5".
This means it is a 6 lug pattern with a circle diameter of 139.7mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Cadillac Escalade appears from 1999 to 2024 (25 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
2014 Cadillac Escalade — Frequently Asked Questions
What is the bolt pattern for a 2014 Cadillac Escalade?
The 2014 Cadillac Escalade uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 24mm.
What other years of Cadillac Escalade have the same bolt pattern as the 2014?
The Cadillac Escalade uses the 6x139.7 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2014 Cadillac?
The 2014 Escalade uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2014 Cadillac Escalade?
The OEM offset for the 2014 Escalade is typically around 24mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2014 Cadillac Escalade use?
The 2014 Cadillac Escalade uses N 14x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I put aftermarket wheels on my 2014 Cadillac Escalade?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 24mm, and a center bore of at least 78.1mm (using hub rings if larger).
Fitment Checklist Before You Buy Wheels
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Cadillac Escalade is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1999-2024 (25 model years).
- Observed bolt-pattern variants: 1 (6x139.7).
- Observed total offset span across years: 8.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2014 Cadillac Escalade, please report it via our About page contact so we can verify and update this record.