2011 Cadillac Escalade Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Cadillac Escalade, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 14x1.50 |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 32 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2011 Escalade — Year-Specific Fitment Context
The 2011 Cadillac Escalade is in year 13 of 26 using the 6x139.7 pattern (1999–2024). Wheels from any 1999–2024 Cadillac Escalade are cross-compatible with the 2011 model.
Cadillac Escalade Bolt Pattern by Year
The table below shows how the Escalade's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 6x139.7 | 78.1 | 32 |
| 2000 | 6x139.7 | 78.1 | 32 |
| 2002 | 6x139.7 | 78.1 | 32 |
| 2003 | 6x139.7 | 78.1 | 32 |
| 2004 | 6x139.7 | 78.1 | 32 |
| 2005 | 6x139.7 | 78.1 | 32 |
| 2006 | 6x139.7 | 78.1 | 32 |
| 2007 | 6x139.7 | 78.1 | 32 |
| 2008 | 6x139.7 | 78.1 | 32 |
| 2009 | 6x139.7 | 78.1 | 32 |
| 2010 | 6x139.7 | 78.1 | 32 |
| ▸ 2011 | 6x139.7 | 78.1 | 32 |
| 2012 | 6x139.7 | 78.1 | 32 |
| 2013 | 6x139.7 | 78.1 | 32 |
| 2014 | 6x139.7 | 78.1 | 24 |
| 2015 | 6x139.7 | 78.1 | 24 |
| 2016 | 6x139.7 | 78.1 | 24 |
| 2017 | 6x139.7 | 78.1 | 24 |
| 2018 | 6x139.7 | 78.1 | 24 |
| 2019 | 6x139.7 | 78.1 | 24 |
| 2020 | 6x139.7 | 78.1 | 24 |
| 2021 | 6x139.7 | 78.1 | 24 |
| 2022 | 6x139.7 | 78.1 | 24 |
| 2023 | 6x139.7 | 78.1 | 24 |
| 2024 | 6x139.7 | 78.1 | 24 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2011 Cadillac Escalade
The 2011 Cadillac Escalade uses a 6x139.7 bolt pattern with a 78.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 32mm; deviations beyond ±10mm may cause rubbing or clearance issues with suspension and brakes. Always verify lug nut compatibility: the Escalade requires M14x1.50 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel separation. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Cadillac Escalade appears from 1999 to 2024 (25 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 8.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 140 ft-lbs after 50-100 miles of driving.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 78.1mm bore is critical for proper centering.
- ✅ Check for brake caliper clearance when using wheels with offset less than 22mm or greater than 42mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Cadillac Escalade — Frequently Asked Questions
What is the bolt pattern for a 2011 Cadillac Escalade?
The 2011 Cadillac Escalade uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 32mm.
What other years of Cadillac Escalade have the same bolt pattern as the 2011?
The Cadillac Escalade uses the 6x139.7 pattern from 1999 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Will wheels from another Cadillac fit my 2011 Escalade?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 78.1mm.
What is the factory wheel offset for a 2011 Cadillac Escalade?
The OEM offset for the 2011 Escalade is typically around 32mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2011 Cadillac Escalade?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your N 14x1.50 hardware.
How tight should I torque the lug nuts on a 2011 Cadillac Escalade?
Refer to your owner's manual for exact specs, but always tighten the N 14x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset