2015 Cadillac XTS Bolt Pattern

Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Cadillac XTS, along with offset and center bore data.

Bolt Pattern (Lug Pattern) 5x120.65 (5x4.75")
Lug Nut / Bolt Size N 12x1.50
Center Bore (CB) 67.1 mm
Offset (ET) 40
Torque Specs 80 ft-lbs (108 Nm)

2015 XTS — Year-Specific Fitment Context

The 2015 Cadillac XTS is in year 3 of 5 using the 5x120.65 pattern (2013–2017). Wheels from any 2013–2017 Cadillac XTS are cross-compatible with the 2015 model. Across its full production run (2013–2019), the XTS has also used: 5x120.

Cadillac XTS Bolt Pattern by Year

The table below shows how the XTS's wheel specifications have changed over the years. The 2015 model year is highlighted.

Year Bolt Pattern Center Bore Offset
2013 5x120.65 67.1 40
2014 5x120.65 67.1 40
▸ 2015 5x120.65 67.1 40
2016 5x120.65 67.1 40
2017 5x120.65 67.1 40
2018 5x120 66.9 35-45mm
2019 5x120 66.9 35-45mm

Fitment Notes

The 2015 Cadillac XTS has a bolt pattern of 5x120.65.

Imperial Conversion: This bolt pattern is commonly referred to as 5x4.75" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x4.75".

This means it is a 5 lug pattern with a circle diameter of 120.65mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.

Year-to-Year Fitment Context

In our dataset, Cadillac XTS appears from 2013 to 2019 (7 model years).

Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).

5x120.65 Pattern Context

This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.

Examples of other vehicles using 5x120.65:

2015 Cadillac XTS — Frequently Asked Questions

What is the bolt pattern for a 2015 Cadillac XTS?

The 2015 Cadillac XTS uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40mm.

What other years of Cadillac XTS have the same bolt pattern as the 2015?

The Cadillac XTS uses the 5x120.65 pattern from 2013 through 2017. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.

Can I put aftermarket wheels on my 2015 Cadillac XTS?

Absolutely. Just ensure the aftermarket wheels have a 5x120.65 bolt pattern, an offset near 40mm, and a center bore of at least 67.1mm (using hub rings if larger).

How tight should I torque the lug nuts on a 2015 Cadillac XTS?

Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.

What lug nut size does the 2015 Cadillac XTS use?

The 2015 Cadillac XTS uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.

What is the PCD for a 2015 Cadillac XTS?

PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2015 XTS, the PCD is 5x120.65.

Fitment Checklist Before You Buy Wheels

Editorial Fitment Notes

Cadillac XTS has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.

Data Quality & Review

Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.

Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team

If you find a discrepancy for 2015 Cadillac XTS, please report it via our About page contact so we can verify and update this record.

Cadillac XTS By Year

2013 2014 2015 2016 2017 2018 2019

Other Cadillac Models

ATS Allante CT4 CT6 CTS Catera Celestiq DTS DeVille ELR Escalade Escalade ESV Escalade IQ Fleetwood Sixty Special Vistiq XT4 XT5 XT6 XTS