2016 Cadillac XTS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Cadillac XTS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2016 XTS — Year-Specific Fitment Context
The 2016 Cadillac XTS is in year 4 of 5 using the 5x120.65 pattern (2013–2017). Wheels from any 2013–2017 Cadillac XTS are cross-compatible with the 2016 model. Across its full production run (2013–2019), the XTS has also used: 5x120.
Cadillac XTS Bolt Pattern by Year
The table below shows how the XTS's wheel specifications have changed over the years. The 2016 model year is highlighted.
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2016 Cadillac XTS
For your 2016 Cadillac XTS, the bolt pattern is 5x120.65 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—factory uses a conical seat. Using incorrect lug nuts can lead to wheel detachment. Wheels from 2013–2017 XTS models are direct fit. For 2018–2019 models with 5x120 pattern, hub-centric rings are required.
Historical Fitment Data Reference
In our dataset, Cadillac XTS appears from 2013 to 2019 (7 model years). Across model years, this model appears with 2 bolt patterns (5x120, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; the 67.1mm bore is critical for centering.
- ✅ Check inner clearance for brake calipers when using wheels with offset below 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Cadillac XTS — Frequently Asked Questions
What is the bolt pattern for a 2016 Cadillac XTS?
The 2016 Cadillac XTS uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 40mm.
What other years of Cadillac XTS have the same bolt pattern as the 2016?
The Cadillac XTS uses the 5x120.65 pattern from 2013 through 2017. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the center bore of a 2016 Cadillac XTS?
The factory center bore (hub bore) for the 2016 Cadillac XTS is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 2016 Cadillac XTS use?
The 2016 Cadillac XTS uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2016 Cadillac XTS?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2016 Cadillac?
The 2016 XTS uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset