2000 Chevrolet Blazer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2000 Chevrolet Blazer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 10 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2000 Blazer — Year-Specific Fitment Context
The 2000 Chevrolet Blazer is in year 9 of 14 using the 5x120.65 pattern (1992–2005). Wheels from any 1992–2005 Chevrolet Blazer are cross-compatible with the 2000 model. Across its full production run (1992–2024), the Blazer has also used: 6x120.
Chevrolet Blazer Bolt Pattern by Year
The table below shows how the Blazer's wheel specifications have changed over the years. The 2000 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 10 |
| 1993 | 5x120.65 | 70.3 | 10 |
| 1994 | 5x120.65 | 70.3 | 10 |
| 1995 | 5x120.65 | 70.3 | 10 |
| 1996 | 5x120.65 | 70.3 | 10 |
| 1997 | 5x120.65 | 70.3 | 10 |
| 1998 | 5x120.65 | 70.3 | 10 |
| 1999 | 5x120.65 | 70.3 | 10 |
| ▸ 2000 | 5x120.65 | 70.3 | 10 |
| 2001 | 5x120.65 | 70.3 | 10 |
| 2002 | 5x120.65 | 70.3 | 10 |
| 2003 | 5x120.65 | 70.3 | 10 |
| 2004 | 5x120.65 | 70.3 | 10 |
| 2005 | 5x120.65 | 70.3 | 10 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2000 Chevrolet Blazer
For your 2000 Chevrolet Blazer, the bolt pattern is 5x120.65mm, shared with 1992–2005 models. The center bore is 70.3mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory offset is 10mm, and staying within ±5mm is recommended to avoid rubbing or suspension interference. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree taper). Mixing seat types can cause wheel loosening. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Chevrolet Blazer appears from 1992 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x120.65, 6x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 40.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 70.3mm to prevent vibration.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 5mm or above 15mm to prevent rubbing or clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2000 Chevrolet Blazer — Frequently Asked Questions
What is the bolt pattern for a 2000 Chevrolet Blazer?
The 2000 Chevrolet Blazer uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 10mm.
What other years of Chevrolet Blazer have the same bolt pattern as the 2000?
The Chevrolet Blazer uses the 5x120.65 pattern from 1992 through 2005. Wheels from any of these model years are dimensionally compatible with the 2000, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2000 Chevrolet?
The 2000 Blazer uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Chevrolet fit my 2000 Blazer?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
Do 2000 Chevrolet Blazers use lug bolts or lug nuts?
The 2000 Blazer requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What lug nut size does the 2000 Chevrolet Blazer use?
The 2000 Chevrolet Blazer uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset