2001 Chevrolet Blazer Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Chevrolet Blazer, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 10 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2001 Blazer — Year-Specific Fitment Context
The 2001 Chevrolet Blazer is in year 10 of 14 using the 5x120.65 pattern (1992–2005). Wheels from any 1992–2005 Chevrolet Blazer are cross-compatible with the 2001 model. Across its full production run (1992–2024), the Blazer has also used: 6x120.
Chevrolet Blazer Bolt Pattern by Year
The table below shows how the Blazer's wheel specifications have changed over the years. The 2001 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x120.65 | 70.3 | 10 |
| 1993 | 5x120.65 | 70.3 | 10 |
| 1994 | 5x120.65 | 70.3 | 10 |
| 1995 | 5x120.65 | 70.3 | 10 |
| 1996 | 5x120.65 | 70.3 | 10 |
| 1997 | 5x120.65 | 70.3 | 10 |
| 1998 | 5x120.65 | 70.3 | 10 |
| 1999 | 5x120.65 | 70.3 | 10 |
| 2000 | 5x120.65 | 70.3 | 10 |
| ▸ 2001 | 5x120.65 | 70.3 | 10 |
| 2002 | 5x120.65 | 70.3 | 10 |
| 2003 | 5x120.65 | 70.3 | 10 |
| 2004 | 5x120.65 | 70.3 | 10 |
| 2005 | 5x120.65 | 70.3 | 10 |
| 2019 | 6x120 | 66.9 | 50 |
| 2020 | 6x120 | 66.9 | 50 |
| 2021 | 6x120 | 66.9 | 50 |
| 2022 | 6x120 | 66.9 | 50 |
| 2023 | 6x120 | 66.9 | 50 |
| 2024 | 6x120 | 66.9 | 50 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2001 Chevrolet Blazer
For your 2001 Chevrolet Blazer, the 5x120.65 bolt pattern and 70.3mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load support. The offset is sensitive; a 10mm range (e.g., 0-20mm) is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree) to prevent loosening or wheel damage. Verify that the wheel's load rating exceeds the vehicle's gross axle weight rating.
Historical Fitment Data Reference
In our dataset, Chevrolet Blazer appears from 1992 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x120.65, 6x120).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 40.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 6x120 pattern Blazers (2006+) without adapters, as they are not directly compatible.
- ✅ Check for caliper clearance when using wheels with offset below 0mm, as the Blazer's front brakes are large.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2001 Chevrolet Blazer — Frequently Asked Questions
What is the bolt pattern for a 2001 Chevrolet Blazer?
The 2001 Chevrolet Blazer uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 10mm.
What other years of Chevrolet Blazer have the same bolt pattern as the 2001?
The Chevrolet Blazer uses the 5x120.65 pattern from 1992 through 2005. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
What does 10mm offset mean for the 2001 Blazer?
An offset of 10mm means the wheel's mounting surface is 10mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chevrolet.
Can I use spacers on my 2001 Chevrolet Blazer?
Yes, but ensure the wheel spacers match the 5x120.65 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Will wheels from another Chevrolet fit my 2001 Blazer?
Only if they share the exact same 5x120.65 bolt pattern, a compatible offset, and a center bore equal to or larger than 70.3mm.
How do I measure the bolt pattern on my 2001 Chevrolet?
The 2001 Blazer uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset