2001 Chevrolet Lumina Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2001 Chevrolet Lumina, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2001 Lumina — Year-Specific Fitment Context
The 2001 model year is the final year of the Chevrolet Lumina's 5x115 bolt pattern run (since 1992). Wheels from any 1992–2001 Chevrolet Lumina are cross-compatible with the 2001 model.
Chevrolet Lumina Bolt Pattern by Year
The table below shows how the Lumina's wheel specifications have changed over the years. The 2001 model year is highlighted.
Fitment Notes
The 2001 Chevrolet Lumina has a bolt pattern of 5x115.
This means it is a 5 lug pattern with a circle diameter of 115mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chevrolet Lumina appears from 1992 to 2001 (10 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
2001 Chevrolet Lumina — Frequently Asked Questions
What is the bolt pattern for a 2001 Chevrolet Lumina?
The 2001 Chevrolet Lumina uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 42mm.
What other years of Chevrolet Lumina have the same bolt pattern as the 2001?
The Chevrolet Lumina uses the 5x115 pattern from 1992 through 2001. Wheels from any of these model years are dimensionally compatible with the 2001, provided the offset and center bore also match.
Why is matching the 70.3mm center bore important for the 2001 Lumina?
The 70.3mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2001 Chevrolet Lumina?
The OEM offset for the 2001 Lumina is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How tight should I torque the lug nuts on a 2001 Chevrolet Lumina?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2001 Chevrolet Lumina?
The factory center bore (hub bore) for the 2001 Chevrolet Lumina is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Chevrolet Lumina is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 1992-2001 (10 model years).
- Observed bolt-pattern variants: 1 (5x115).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2001 Chevrolet Lumina, please report it via our About page contact so we can verify and update this record.