2008 Chrysler Sebring Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Chrysler Sebring, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Sebring — Year-Specific Fitment Context
The 2008 Chrysler Sebring is in year 14 of 16 using the 5x114.3 pattern (1995–2010). Wheels from any 1995–2010 Chrysler Sebring are cross-compatible with the 2008 model.
Chrysler Sebring Bolt Pattern by Year
The table below shows how the Sebring's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 67.1 | 42 |
| 1996 | 5x114.3 | 67.1 | 42 |
| 1997 | 5x114.3 | 67.1 | 42 |
| 1998 | 5x114.3 | 67.1 | 42 |
| 1999 | 5x114.3 | 67.1 | 42 |
| 2000 | 5x114.3 | 67.1 | 42 |
| 2001 | 5x114.3 | 67.1 | 42 |
| 2002 | 5x114.3 | 67.1 | 42 |
| 2003 | 5x114.3 | 67.1 | 42 |
| 2004 | 5x114.3 | 67.1 | 42 |
| 2005 | 5x114.3 | 67.1 | 42 |
| 2006 | 5x114.3 | 67.1 | 42 |
| 2007 | 5x114.3 | 67.1 | 42 |
| ▸ 2008 | 5x114.3 | 67.1 | 42 |
| 2009 | 5x114.3 | 67.1 | 42 |
| 2010 | 5x114.3 | 67.1 | 42 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Chrysler Sebring
For your 2008 Chrysler Sebring, the correct bolt pattern is 5x114.3 with a center bore of 67.1mm. Aftermarket wheels often have a larger bore, so you must use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 42mm; staying within ±5mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use a cone seat, while aftermarket may require ball or acorn seats. Never mix seat types, as improper engagement can cause wheel loss. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Chrysler Sebring appears from 1995 to 2010 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2011+ Sebring models as they use a different bolt pattern (5x115).
- ✅ Check for caliper clearance when using wheels with offset below 38mm or above 46mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Chrysler Sebring — Frequently Asked Questions
What is the bolt pattern for a 2008 Chrysler Sebring?
The 2008 Chrysler Sebring uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42mm.
What other years of Chrysler Sebring have the same bolt pattern as the 2008?
The Chrysler Sebring uses the 5x114.3 pattern from 1995 through 2010. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What does 42mm offset mean for the 2008 Sebring?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Chrysler.
Why is matching the 67.1mm center bore important for the 2008 Sebring?
The 67.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How tight should I torque the lug nuts on a 2008 Chrysler Sebring?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I put aftermarket wheels on my 2008 Chrysler Sebring?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 42mm, and a center bore of at least 67.1mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset