1997 Chrysler Sebring Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Chrysler Sebring, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1997 Sebring — Year-Specific Fitment Context
The 1997 Chrysler Sebring is in year 3 of 16 using the 5x114.3 pattern (1995–2010). Wheels from any 1995–2010 Chrysler Sebring are cross-compatible with the 1997 model.
Chrysler Sebring Bolt Pattern by Year
The table below shows how the Sebring's wheel specifications have changed over the years. The 1997 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 67.1 | 42 |
| 1996 | 5x114.3 | 67.1 | 42 |
| ▸ 1997 | 5x114.3 | 67.1 | 42 |
| 1998 | 5x114.3 | 67.1 | 42 |
| 1999 | 5x114.3 | 67.1 | 42 |
| 2000 | 5x114.3 | 67.1 | 42 |
| 2001 | 5x114.3 | 67.1 | 42 |
| 2002 | 5x114.3 | 67.1 | 42 |
| 2003 | 5x114.3 | 67.1 | 42 |
| 2004 | 5x114.3 | 67.1 | 42 |
| 2005 | 5x114.3 | 67.1 | 42 |
| 2006 | 5x114.3 | 67.1 | 42 |
| 2007 | 5x114.3 | 67.1 | 42 |
| 2008 | 5x114.3 | 67.1 | 42 |
| 2009 | 5x114.3 | 67.1 | 42 |
| 2010 | 5x114.3 | 67.1 | 42 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1997 Chrysler Sebring
For your 1997 Chrysler Sebring, the 5x114.3 bolt pattern is shared across 1995–2010 models, ensuring cross-compatibility. However, the 67.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball-seat nuts as specified. Avoid using incorrect lug nuts, as they can loosen or damage the wheel. Safety first: improper fitment compromises handling and braking.
Historical Fitment Data Reference
In our dataset, Chrysler Sebring appears from 1995 to 2010 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-100 ft-lbs after 50 miles of driving to account for settling.
- ✅ When using aftermarket wheels, always install hub-centric rings to match the 67.1mm bore; plastic rings are acceptable for street use.
- ✅ Check for caliper clearance with aftermarket wheels, especially if offset is lower than 42mm; spacers may be needed but require longer studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Chrysler Sebring — Frequently Asked Questions
What is the bolt pattern for a 1997 Chrysler Sebring?
The 1997 Chrysler Sebring uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42mm.
What other years of Chrysler Sebring have the same bolt pattern as the 1997?
The Chrysler Sebring uses the 5x114.3 pattern from 1995 through 2010. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Can I use spacers on my 1997 Chrysler Sebring?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
What is the PCD for a 1997 Chrysler Sebring?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1997 Sebring, the PCD is 5x114.3.
Will wheels from another Chrysler fit my 1997 Sebring?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 67.1mm.
What is the center bore of a 1997 Chrysler Sebring?
The factory center bore (hub bore) for the 1997 Chrysler Sebring is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset