2010 Chrysler Sebring Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Chrysler Sebring, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Sebring — Year-Specific Fitment Context
The 2010 model year is the final year of the Chrysler Sebring's 5x114.3 bolt pattern run (since 1995). Wheels from any 1995–2010 Chrysler Sebring are cross-compatible with the 2010 model.
Chrysler Sebring Bolt Pattern by Year
The table below shows how the Sebring's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1995 | 5x114.3 | 67.1 | 42 |
| 1996 | 5x114.3 | 67.1 | 42 |
| 1997 | 5x114.3 | 67.1 | 42 |
| 1998 | 5x114.3 | 67.1 | 42 |
| 1999 | 5x114.3 | 67.1 | 42 |
| 2000 | 5x114.3 | 67.1 | 42 |
| 2001 | 5x114.3 | 67.1 | 42 |
| 2002 | 5x114.3 | 67.1 | 42 |
| 2003 | 5x114.3 | 67.1 | 42 |
| 2004 | 5x114.3 | 67.1 | 42 |
| 2005 | 5x114.3 | 67.1 | 42 |
| 2006 | 5x114.3 | 67.1 | 42 |
| 2007 | 5x114.3 | 67.1 | 42 |
| 2008 | 5x114.3 | 67.1 | 42 |
| 2009 | 5x114.3 | 67.1 | 42 |
| ▸ 2010 | 5x114.3 | 67.1 | 42 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Chrysler Sebring
For your 2010 Chrysler Sebring, the bolt pattern is 5x114.3, but the center bore is 67.1mm—critical for hub-centric fitment. Aftermarket wheels often have a larger bore (73.1mm common), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive: stock is 42mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: M12x1.50 thread pitch with a 60-degree conical seat. Using incorrect seat type (e.g., ball seat) can lead to wheel loosening. Verify wheel load rating meets or exceeds OEM specs for safety.
Historical Fitment Data Reference
In our dataset, Chrysler Sebring appears from 1995 to 2010 (16 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid wheels with offset below 35mm (too aggressive) or above 48mm (too tucked) to prevent suspension or brake caliper contact.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed; plastic rings are acceptable for street use but metal rings are recommended for track use.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Chrysler Sebring — Frequently Asked Questions
What is the bolt pattern for a 2010 Chrysler Sebring?
The 2010 Chrysler Sebring uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 42mm.
What other years of Chrysler Sebring have the same bolt pattern as the 2010?
The Chrysler Sebring uses the 5x114.3 pattern from 1995 through 2010. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Chrysler Sebring?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Sebring, the PCD is 5x114.3.
Can I use spacers on my 2010 Chrysler Sebring?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How tight should I torque the lug nuts on a 2010 Chrysler Sebring?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2010 Chrysler Sebring?
The factory center bore (hub bore) for the 2010 Chrysler Sebring is 67.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset