1996 Chrysler Town & Country Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Chrysler Town & Country, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1996 Town & Country — Year-Specific Fitment Context
The 1996 Chrysler Town & Country is in year 5 of 17 using the 5x114.3 pattern (1992–2008). Wheels from any 1992–2008 Chrysler Town & Country are cross-compatible with the 1996 model. Across its full production run (1992–2016), the Town & Country has also used: 5x127.
Chrysler Town & Country Bolt Pattern by Year
The table below shows how the Town & Country's wheel specifications have changed over the years. The 1996 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 71.6 | 40 |
| 1993 | 5x114.3 | 71.6 | 40 |
| 1994 | 5x114.3 | 71.6 | 40 |
| 1995 | 5x114.3 | 71.6 | 40 |
| ▸ 1996 | 5x114.3 | 71.6 | 40 |
| 1997 | 5x114.3 | 71.6 | 40 |
| 1998 | 5x114.3 | 71.6 | 40 |
| 1999 | 5x114.3 | 71.6 | 40 |
| 2000 | 5x114.3 | 71.6 | 40 |
| 2001 | 5x114.3 | 71.6 | 40 |
| 2002 | 5x114.3 | 71.6 | 40 |
| 2003 | 5x114.3 | 71.6 | 40 |
| 2004 | 5x114.3 | 71.6 | 40 |
| 2005 | 5x114.3 | 71.6 | 40 |
| 2006 | 5x114.3 | 71.6 | 40 |
| 2007 | 5x114.3 | 71.6 | 40 |
| 2008 | 5x114.3 | 71.6 | 40 |
| 2009 | 5x127 | 71.6 | 40 |
| 2010 | 5x127 | 71.6 | 40 |
| 2011 | 5x127 | 71.6 | 40 |
| 2012 | 5x127 | 71.6 | 40 |
| 2013 | 5x127 | 71.6 | 40 |
| 2014 | 5x127 | 71.6 | 40 |
| 2015 | 5x127 | 71.6 | 40 |
| 2016 | 5x127 | 71.6 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1996 Chrysler Town & Country
For your 1996 Chrysler Town & Country, the bolt pattern is 5x114.3 with a critical center bore of 71.6mm. Aftermarket wheels often have a larger bore, so hub-centric rings are mandatory to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive; stock is 40mm. Sticking within ±5mm maintains proper scrub radius and clearance. Avoid excessive negative offset to prevent bearing wear. Lug nuts are 12x1.5 thread pitch; use the correct seat type (cone or ball) to avoid loosening. Never mix thread pitches. Always torque to spec and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Chrysler Town & Country appears from 1992 to 2016 (25 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, verify hub bore and install hub-centric rings if needed.
- ✅ Avoid spacers unless necessary; if used, ensure they are hub-centric and use extended studs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Chrysler Town & Country — Frequently Asked Questions
What is the bolt pattern for a 1996 Chrysler Town & Country?
The 1996 Chrysler Town & Country uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Town & Country have the same bolt pattern as the 1996?
The Chrysler Town & Country uses the 5x114.3 pattern from 1992 through 2008. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
What lug nut size does the 1996 Chrysler Town & Country use?
The 1996 Chrysler Town & Country uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the factory wheel offset for a 1996 Chrysler Town & Country?
The OEM offset for the 1996 Town & Country is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 1996 Chrysler Town & Country?
The factory center bore (hub bore) for the 1996 Chrysler Town & Country is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I put aftermarket wheels on my 1996 Chrysler Town & Country?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset