2011 Chrysler Town & Country Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Chrysler Town & Country, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Town & Country — Year-Specific Fitment Context
The 2011 Chrysler Town & Country is in year 3 of 8 using the 5x127 pattern (2009–2016). Wheels from any 2009–2016 Chrysler Town & Country are cross-compatible with the 2011 model. Across its full production run (1992–2016), the Town & Country has also used: 5x114.3.
Chrysler Town & Country Bolt Pattern by Year
The table below shows how the Town & Country's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 71.6 | 40 |
| 1993 | 5x114.3 | 71.6 | 40 |
| 1994 | 5x114.3 | 71.6 | 40 |
| 1995 | 5x114.3 | 71.6 | 40 |
| 1996 | 5x114.3 | 71.6 | 40 |
| 1997 | 5x114.3 | 71.6 | 40 |
| 1998 | 5x114.3 | 71.6 | 40 |
| 1999 | 5x114.3 | 71.6 | 40 |
| 2000 | 5x114.3 | 71.6 | 40 |
| 2001 | 5x114.3 | 71.6 | 40 |
| 2002 | 5x114.3 | 71.6 | 40 |
| 2003 | 5x114.3 | 71.6 | 40 |
| 2004 | 5x114.3 | 71.6 | 40 |
| 2005 | 5x114.3 | 71.6 | 40 |
| 2006 | 5x114.3 | 71.6 | 40 |
| 2007 | 5x114.3 | 71.6 | 40 |
| 2008 | 5x114.3 | 71.6 | 40 |
| 2009 | 5x127 | 71.6 | 40 |
| 2010 | 5x127 | 71.6 | 40 |
| ▸ 2011 | 5x127 | 71.6 | 40 |
| 2012 | 5x127 | 71.6 | 40 |
| 2013 | 5x127 | 71.6 | 40 |
| 2014 | 5x127 | 71.6 | 40 |
| 2015 | 5x127 | 71.6 | 40 |
| 2016 | 5x127 | 71.6 | 40 |
Fitment Notes
The 2011 Chrysler Town & Country has a bolt pattern of 5x127.
Imperial Conversion: This bolt pattern is commonly referred to as 5x5" in imperial units. When searching for aftermarket wheels, you may see them listed as 5x5".
This means it is a 5 lug pattern with a circle diameter of 127mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Chrysler Town & Country appears from 1992 to 2016 (25 model years).
Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
2011 Chrysler Town & Country — Frequently Asked Questions
What is the bolt pattern for a 2011 Chrysler Town & Country?
The 2011 Chrysler Town & Country uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Town & Country have the same bolt pattern as the 2011?
The Chrysler Town & Country uses the 5x127 pattern from 2009 through 2016. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2011 Chrysler Town & Country?
Absolutely. Just ensure the aftermarket wheels have a 5x127 bolt pattern, an offset near 40mm, and a center bore of at least 71.6mm (using hub rings if larger).
Do 2011 Chrysler Town & Countrys use lug bolts or lug nuts?
The 2011 Town & Country requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2011 Chrysler Town & Country?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2011 Chrysler Town & Country?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Town & Country, the PCD is 5x127.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Editorial Fitment Notes
Chrysler Town & Country has multiple wheel-fitment records across generations, so matching exact year and trim is important before ordering wheels.
- Observed production years in our database: 1992-2016 (25 model years).
- Observed bolt-pattern variants: 2 (5x114.3, 5x127).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2011 Chrysler Town & Country, please report it via our About page contact so we can verify and update this record.