1994 Chrysler Town & Country Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Chrysler Town & Country, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1994 Town & Country — Year-Specific Fitment Context
The 1994 Chrysler Town & Country is in year 3 of 17 using the 5x114.3 pattern (1992–2008). Wheels from any 1992–2008 Chrysler Town & Country are cross-compatible with the 1994 model. Across its full production run (1992–2016), the Town & Country has also used: 5x127.
Chrysler Town & Country Bolt Pattern by Year
The table below shows how the Town & Country's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1992 | 5x114.3 | 71.6 | 40 |
| 1993 | 5x114.3 | 71.6 | 40 |
| ▸ 1994 | 5x114.3 | 71.6 | 40 |
| 1995 | 5x114.3 | 71.6 | 40 |
| 1996 | 5x114.3 | 71.6 | 40 |
| 1997 | 5x114.3 | 71.6 | 40 |
| 1998 | 5x114.3 | 71.6 | 40 |
| 1999 | 5x114.3 | 71.6 | 40 |
| 2000 | 5x114.3 | 71.6 | 40 |
| 2001 | 5x114.3 | 71.6 | 40 |
| 2002 | 5x114.3 | 71.6 | 40 |
| 2003 | 5x114.3 | 71.6 | 40 |
| 2004 | 5x114.3 | 71.6 | 40 |
| 2005 | 5x114.3 | 71.6 | 40 |
| 2006 | 5x114.3 | 71.6 | 40 |
| 2007 | 5x114.3 | 71.6 | 40 |
| 2008 | 5x114.3 | 71.6 | 40 |
| 2009 | 5x127 | 71.6 | 40 |
| 2010 | 5x127 | 71.6 | 40 |
| 2011 | 5x127 | 71.6 | 40 |
| 2012 | 5x127 | 71.6 | 40 |
| 2013 | 5x127 | 71.6 | 40 |
| 2014 | 5x127 | 71.6 | 40 |
| 2015 | 5x127 | 71.6 | 40 |
| 2016 | 5x127 | 71.6 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1994 Chrysler Town & Country
For your 1994 Chrysler Town & Country, the 5x114.3 bolt pattern is shared with 1992–2008 models, ensuring broad cross-compatibility. The 71.6mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; stock is 40mm. Deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone or ball) to avoid wheel loosening. Never reuse old lug nuts. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Chrysler Town & Country appears from 1992 to 2016 (25 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95–105 ft-lbs after 50–100 miles of driving.
- ✅ Avoid wheels from 2009+ Town & Country models; they use a 5x127 pattern.
- ✅ Check inner clearance for aftermarket wheels; the 40mm offset is tight on some designs.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1994 Chrysler Town & Country — Frequently Asked Questions
What is the bolt pattern for a 1994 Chrysler Town & Country?
The 1994 Chrysler Town & Country uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Town & Country have the same bolt pattern as the 1994?
The Chrysler Town & Country uses the 5x114.3 pattern from 1992 through 2008. Wheels from any of these model years are dimensionally compatible with the 1994, provided the offset and center bore also match.
What is the factory wheel offset for a 1994 Chrysler Town & Country?
The OEM offset for the 1994 Town & Country is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
How do I measure the bolt pattern on my 1994 Chrysler?
The 1994 Town & Country uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Chrysler fit my 1994 Town & Country?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.6mm.
What is the PCD for a 1994 Chrysler Town & Country?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1994 Town & Country, the PCD is 5x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset