1992 Chrysler Town & Country Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1992 Chrysler Town & Country, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1992 Town & Country — Year-Specific Fitment Context
The 1992 model year marks the beginning of the Chrysler Town & Country's 5x114.3 bolt pattern era, which continued through 2008 (17 consecutive years). Wheels from any 1992–2008 Chrysler Town & Country are cross-compatible with the 1992 model. Across its full production run (1992–2016), the Town & Country has also used: 5x127.
Chrysler Town & Country Bolt Pattern by Year
The table below shows how the Town & Country's wheel specifications have changed over the years. The 1992 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 1992 | 5x114.3 | 71.6 | 40 |
| 1993 | 5x114.3 | 71.6 | 40 |
| 1994 | 5x114.3 | 71.6 | 40 |
| 1995 | 5x114.3 | 71.6 | 40 |
| 1996 | 5x114.3 | 71.6 | 40 |
| 1997 | 5x114.3 | 71.6 | 40 |
| 1998 | 5x114.3 | 71.6 | 40 |
| 1999 | 5x114.3 | 71.6 | 40 |
| 2000 | 5x114.3 | 71.6 | 40 |
| 2001 | 5x114.3 | 71.6 | 40 |
| 2002 | 5x114.3 | 71.6 | 40 |
| 2003 | 5x114.3 | 71.6 | 40 |
| 2004 | 5x114.3 | 71.6 | 40 |
| 2005 | 5x114.3 | 71.6 | 40 |
| 2006 | 5x114.3 | 71.6 | 40 |
| 2007 | 5x114.3 | 71.6 | 40 |
| 2008 | 5x114.3 | 71.6 | 40 |
| 2009 | 5x127 | 71.6 | 40 |
| 2010 | 5x127 | 71.6 | 40 |
| 2011 | 5x127 | 71.6 | 40 |
| 2012 | 5x127 | 71.6 | 40 |
| 2013 | 5x127 | 71.6 | 40 |
| 2014 | 5x127 | 71.6 | 40 |
| 2015 | 5x127 | 71.6 | 40 |
| 2016 | 5x127 | 71.6 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1992 Chrysler Town & Country
For your 1992 Chrysler Town & Country, the bolt pattern is 5x114.3, center bore 71.6mm, and offset around 40mm. The 71.6mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: staying within 35-45mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.50) and seat type (cone seat). Mismatched lug nuts can cause wheel loosening or damage. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Chrysler Town & Country appears from 1992 to 2016 (25 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x127).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ When using aftermarket wheels, always install hub-centric rings to match the 71.6mm center bore.
- ✅ Check for brake caliper clearance, especially with lower offsets, as the 1992 model has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1992 Chrysler Town & Country — Frequently Asked Questions
What is the bolt pattern for a 1992 Chrysler Town & Country?
The 1992 Chrysler Town & Country uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 40mm.
What other years of Chrysler Town & Country have the same bolt pattern as the 1992?
The Chrysler Town & Country uses the 5x114.3 pattern from 1992 through 2008. Wheels from any of these model years are dimensionally compatible with the 1992, provided the offset and center bore also match.
How do I measure the bolt pattern on my 1992 Chrysler?
The 1992 Town & Country uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 1992 Chrysler Town & Country?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 1992 Chrysler Town & Country?
The factory center bore (hub bore) for the 1992 Chrysler Town & Country is 71.6mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What lug nut size does the 1992 Chrysler Town & Country use?
The 1992 Chrysler Town & Country uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset