2007 Dodge Durango Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2007 Dodge Durango is 5x139.7 (5x5.5"). It has a center bore of 78.1 mm, an offset range of 35, and utilizes N 1/2" (20 UNF) (Cone seat, 19mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2007 Dodge Durango Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Center Bore (Hub Bore) | 78.1 mm |
| Offset Range (ET) | 35 |
| Thread Size (Lug Nut / Bolt) | N 1/2" (20 UNF) |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2007 Durango — Year-Specific Fitment Context
The 2007 Dodge Durango is in year 3 of 7 using the 5x139.7 pattern (2005–2011). Wheels from any 2005–2011 Dodge Durango are cross-compatible with the 2007 model. Across its full production run (1998–2025), the Durango has also used: 5x127, 6x114.3.
Dodge Durango Bolt Pattern by Year
The table below shows how the Durango's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x114.3 | 71.6 | 30 |
| 1999 | 6x114.3 | 71.6 | 30 |
| 2000 | 6x114.3 | 71.6 | 30 |
| 2001 | 6x114.3 | 71.6 | 30 |
| 2002 | 6x114.3 | 71.6 | 30 |
| 2003 | 6x114.3 | 71.6 | 30 |
| 2004 | 6x114.3 | 71.6 | 30 |
| 2005 | 5x139.7 | 78.1 | 35 |
| 2006 | 5x139.7 | 78.1 | 35 |
| ▸ 2007 | 5x139.7 | 78.1 | 35 |
| 2008 | 5x139.7 | 78.1 | 35 |
| 2009 | 5x139.7 | 78.1 | 35 |
| 2011 | 5x139.7 | 78.1 | 35 |
| 2012 | 5x127 | 71.6 | 53 |
| 2013 | 5x127 | 71.6 | 53 |
| 2014 | 5x127 | 71.6 | 53 |
| 2015 | 5x127 | 71.6 | 53 |
| 2016 | 5x127 | 71.6 | 53 |
| 2017 | 5x127 | 71.6 | 53 |
| 2018 | 5x127 | 71.6 | 53 |
| 2019 | 5x127 | 71.6 | 53 |
| 2020 | 5x127 | 71.5 | 56 |
| 2021 | 5x127 | 71.5 | 56 |
| 2022 | 5x127 | 71.5 | 56 |
| 2023 | 5x127 | 71.5 | 56 |
| 2024 | 5x127 | 71.5 | 56 |
| 2025 | 5x127 | 71.5 | 35-45 |
2007 Dodge Durango Wheel Interchange & Donor Fitment Guide (5x139.7)
The 5x139.7 bolt pattern is shared by 341 vehicles in our database (moderately common). For safe wheel swaps on the 2007 Dodge Durango, donor rims must match the 5x139.7 PCD and have a center bore of at least 78.1 mm:
HUB RING FITMENT Same 5x139.7 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2000 Suzuki Esteem | 108.1 mm | 108.1mm → 78.1mm |
25 |
| 2004 Suzuki Forenza | 108.1 mm | 108.1mm → 78.1mm |
25 |
| 1999 Suzuki Grand Vitara | 108.0 mm | 108.0mm → 78.1mm |
10 |
| 1998 Suzuki Jimny | 108 mm | 108mm → 78.1mm |
22 |
| 1998 Suzuki Jimny Sierra | 108 mm | 108mm → 78.1mm |
5 |
| 1992 Suzuki Samurai | 108.0 mm | 108.0mm → 78.1mm |
5 |
Expert Buying Guide for 2007 Dodge Durango
For your 2007 Dodge Durango, the 5x139.7 bolt pattern is shared with 2005–2011 models, ensuring cross-compatibility. Critical fitment factors: the center bore is 78.1mm—aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset sensitivity is high; the factory offset is 35mm. Deviating more than ±10mm may cause rubbing or clearance issues. Safety warning: use only lug nuts with the correct thread pitch (1/2"-20 UNF) and seat type (conical/ball seat). Mismatched lug nuts can lead to wheel detachment. Always verify lug nut engagement and torque to manufacturer specs.
Historical Fitment Data Reference
In our dataset, Dodge Durango appears from 1998 to 2025 (27 model years). Across model years, this model appears with 3 bolt patterns (5x127, 5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 101.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ If installing aftermarket wheels, confirm hub-centric rings are included or purchase separately to match the 78.1mm bore.
- ✅ Avoid using wheels from pre-2005 Durangos (5x127 pattern) or other models with different bolt patterns without adapters.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
2007 Dodge Durango — Frequently Asked Questions
What is the bolt pattern for a 2007 Dodge Durango?
The 2007 Dodge Durango uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 35mm.
What other years of Dodge Durango have the same bolt pattern as the 2007?
The Dodge Durango uses the 5x139.7 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What does 35mm offset mean for the 2007 Durango?
An offset of 35mm means the wheel's mounting surface is 35mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Dodge.
What is the factory wheel offset for a 2007 Dodge Durango?
The OEM offset for the 2007 Durango is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2007 Dodge Durango?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Durango, the PCD is 5x139.7.
Can I put aftermarket wheels on my 2007 Dodge Durango?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 35mm, and a center bore of at least 78.1mm (using hub rings if larger).
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →