2008 Dodge Durango Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Dodge Durango, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 78.1 mm |
| Offset (ET) | 35 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2008 Durango — Year-Specific Fitment Context
The 2008 Dodge Durango is in year 4 of 7 using the 5x139.7 pattern (2005–2011). Wheels from any 2005–2011 Dodge Durango are cross-compatible with the 2008 model. Across its full production run (1998–2024), the Durango has also used: 5x127, 6x114.3.
Dodge Durango Bolt Pattern by Year
The table below shows how the Durango's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x114.3 | 71.6 | 30 |
| 1999 | 6x114.3 | 71.6 | 30 |
| 2000 | 6x114.3 | 71.6 | 30 |
| 2001 | 6x114.3 | 71.6 | 30 |
| 2002 | 6x114.3 | 71.6 | 30 |
| 2003 | 6x114.3 | 71.6 | 30 |
| 2004 | 6x114.3 | 71.6 | 30 |
| 2005 | 5x139.7 | 78.1 | 35 |
| 2006 | 5x139.7 | 78.1 | 35 |
| 2007 | 5x139.7 | 78.1 | 35 |
| ▸ 2008 | 5x139.7 | 78.1 | 35 |
| 2009 | 5x139.7 | 78.1 | 35 |
| 2011 | 5x139.7 | 78.1 | 35 |
| 2012 | 5x127 | 71.6 | 53 |
| 2013 | 5x127 | 71.6 | 53 |
| 2014 | 5x127 | 71.6 | 53 |
| 2015 | 5x127 | 71.6 | 53 |
| 2016 | 5x127 | 71.6 | 53 |
| 2017 | 5x127 | 71.6 | 53 |
| 2018 | 5x127 | 71.6 | 53 |
| 2019 | 5x127 | 71.6 | 53 |
| 2020 | 5x127 | 71.5 | 56 |
| 2021 | 5x127 | 71.5 | 56 |
| 2022 | 5x127 | 71.5 | 56 |
| 2023 | 5x127 | 71.5 | 56 |
| 2024 | 5x127 | 71.5 | 56 |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2008 Dodge Durango
For your 2008 Dodge Durango, the 5x139.7 bolt pattern and 78.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The recommended offset is 35mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use the correct lug nuts: 1/2"-20 UNF thread with a conical (60-degree) seat. Never use ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles to maintain safety.
Historical Fitment Data Reference
In our dataset, Dodge Durango appears from 1998 to 2024 (26 model years). Across model years, this model appears with 3 bolt patterns (5x127, 5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 26.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100-110 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 78.1mm bore exactly.
- ✅ Avoid wheels with offset below 25mm or above 45mm to prevent suspension or brake clearance issues.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Dodge Durango — Frequently Asked Questions
What is the bolt pattern for a 2008 Dodge Durango?
The 2008 Dodge Durango uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 78.1mm and the offset is 35mm.
What other years of Dodge Durango have the same bolt pattern as the 2008?
The Dodge Durango uses the 5x139.7 pattern from 2005 through 2011. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
Can I use spacers on my 2008 Dodge Durango?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 78.1mm center bore. Also verify that you have enough thread engagement for your N 1/2" (20 UNF) hardware.
What is the factory wheel offset for a 2008 Dodge Durango?
The OEM offset for the 2008 Durango is typically around 35mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2008 Dodge Durango?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Durango, the PCD is 5x139.7.
What is the center bore of a 2008 Dodge Durango?
The factory center bore (hub bore) for the 2008 Dodge Durango is 78.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset