2018 Dodge Durango Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2018 Dodge Durango, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x127 (5x5") |
|---|---|
| Lug Nut / Bolt Size | N 1/2" (20 UNF) |
| Center Bore (CB) | 71.6 mm |
| Offset (ET) | 53 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 5x127 is commonly referred to as 5x5" in US Standard.
2018 Durango — Year-Specific Fitment Context
The 2018 Dodge Durango is in year 7 of 13 using the 5x127 pattern (2012–2024). Wheels from any 2012–2024 Dodge Durango are cross-compatible with the 2018 model. Across its full production run (1998–2024), the Durango has also used: 5x139.7, 6x114.3.
Dodge Durango Bolt Pattern by Year
The table below shows how the Durango's wheel specifications have changed over the years. The 2018 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x114.3 | 71.6 | 30 |
| 1999 | 6x114.3 | 71.6 | 30 |
| 2000 | 6x114.3 | 71.6 | 30 |
| 2001 | 6x114.3 | 71.6 | 30 |
| 2002 | 6x114.3 | 71.6 | 30 |
| 2003 | 6x114.3 | 71.6 | 30 |
| 2004 | 6x114.3 | 71.6 | 30 |
| 2005 | 5x139.7 | 78.1 | 35 |
| 2006 | 5x139.7 | 78.1 | 35 |
| 2007 | 5x139.7 | 78.1 | 35 |
| 2008 | 5x139.7 | 78.1 | 35 |
| 2009 | 5x139.7 | 78.1 | 35 |
| 2011 | 5x139.7 | 78.1 | 35 |
| 2012 | 5x127 | 71.6 | 53 |
| 2013 | 5x127 | 71.6 | 53 |
| 2014 | 5x127 | 71.6 | 53 |
| 2015 | 5x127 | 71.6 | 53 |
| 2016 | 5x127 | 71.6 | 53 |
| 2017 | 5x127 | 71.6 | 53 |
| ▸ 2018 | 5x127 | 71.6 | 53 |
| 2019 | 5x127 | 71.6 | 53 |
| 2020 | 5x127 | 71.5 | 56 |
| 2021 | 5x127 | 71.5 | 56 |
| 2022 | 5x127 | 71.5 | 56 |
| 2023 | 5x127 | 71.5 | 56 |
| 2024 | 5x127 | 71.5 | 56 |
5x127 Pattern Context
This bolt pattern appears on 236 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x127:
Expert Buying Guide for 2018 Dodge Durango
For the 2018 Dodge Durango, the 5x127 bolt pattern and 71.6mm center bore are critical. Aftermarket wheels often have a larger center bore; use hub-centric rings to prevent vibrations and ensure load is on the hub, not the lugs. The factory offset is 53mm; deviations affect handling and tire clearance. Always verify offset to avoid rubbing or suspension contact. Lug nuts are 1/2"-20 UNF with a conical (60-degree) seat. Using incorrect thread pitch or seat type can cause wheel loosening. Re-torque after 50-100 miles. Wheels from 2012-2024 Durango models are direct fit, but avoid earlier generations with different patterns.
Historical Fitment Data Reference
In our dataset, Dodge Durango appears from 1998 to 2024 (26 model years). Across model years, this model appears with 3 bolt patterns (5x127, 5x139.7, 6x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 26.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 71.6mm to prevent vibrations.
- ✅ Re-torque lug nuts to 130-150 ft-lbs after 50-100 miles of driving.
- ✅ Verify offset is within 48-58mm to avoid rubbing on suspension or fenders.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2018 Dodge Durango — Frequently Asked Questions
What is the bolt pattern for a 2018 Dodge Durango?
The 2018 Dodge Durango uses a 5x127 bolt pattern (also called lug pattern or PCD). The center bore is 71.6mm and the offset is 53mm.
What other years of Dodge Durango have the same bolt pattern as the 2018?
The Dodge Durango uses the 5x127 pattern from 2012 through 2024. Wheels from any of these model years are dimensionally compatible with the 2018, provided the offset and center bore also match.
What lug nut size does the 2018 Dodge Durango use?
The 2018 Dodge Durango uses N 1/2" (20 UNF) lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2018 Dodge Durango?
Refer to your owner's manual for exact specs, but always tighten the N 1/2" (20 UNF) hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2018 Dodge Durango?
Yes, but ensure the wheel spacers match the 5x127 bolt pattern and 71.6mm center bore. Also verify that you have enough thread engagement for your N 1/2" (20 UNF) hardware.
What is the factory wheel offset for a 2018 Dodge Durango?
The OEM offset for the 2018 Durango is typically around 53mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset